The 24 VDC coil pulls a holding current of 10 A at rated voltage, so your 24 VDC supply needs to handle that inrush and hold. The coil dropout time is 15 to 18 ms at DC — useful to know if you're sequencing contactors in a safety circuit where timing matters. The arcing time is a tight 10 ms, which keeps contact wear predictable on resistive loads. That's a solid industrial range — no issues in an unheated enclosure or a warm cabinet, as long as you stay inside the curve. The spring-type terminals accept solid or stranded wire from 1 to 10 mm², and you can double up with 2x 0.5 to 2.5 mm². That's enough for most motor control circuits up to the S0 frame rating. No screw torque to worry about, and the spring cage holds tight under vibration.
The contactor is 45 mm wide, 102 mm tall, and 107 mm deep. That's a compact footprint — you can pack several S0 contactors side-by-side on the DIN rail without excessive spacing.