Integrator note: the fit in the can
Depth is 152 mm, height 140 mm, width 70 mm.
Solid wire 2.5...16 mm² or stranded 6...70 mm² for the main circuit. Auxiliary contacts take two wires per terminal: either 2x (0.5...1.5 mm²) or 2x (0.75...2.5 mm²). All screw-type – no special tools needed out in the grease. Mount it on the DIN rail, snap it on, leave those clearances. You can rotate it or tilt it per the manual – just mind the arc clearance: arcing time is 10–20 ms, so give the arc room to breathe.
