Siemens SIRIUS 3RT2325-2AP00-ZX95 — Size S0 Contactor, 230 V 50 Hz Coil
The Siemens SIRIUS 3RT2325-2AP00-ZX95 is a size S0 contactor with a 230 V 50 Hz AC coil, rated for 10 A at both 24 V and 230 V. It carries one instantaneous auxiliary contact and includes an auxiliary switch. The coil termination uses spring-type terminals; main and auxiliary wiring accept solid conductors 2x 0.5 to 2.5 mm² or stranded 1 to 10 mm². Mounting is via screw or snap-on onto 35 mm DIN rail per DIN EN 60715. The mounting position allows ±180° rotation on a vertical surface and ±22.5° tilt forward/backward. Clearance requirements: 10 mm upwards, 10 mm downwards, 10 mm forwards, 6 mm at the side.
Ratings and Switching Capacity
The contactor is rated for 10 A at 24 V AC and 10 A at 230 V AC. At 400 V the rating drops to 3 A; at 690 V it carries 1 A. The arcing time is specified at 10 to 10 ms, and the switching time at AC is 4 to 16 ms. These figures define the load-break capability across common industrial voltages. Auxiliary contact ratings are provided for DC loads: 2 A at 48 V, 6 A at 60 V, 1 A at 110 V, 0.9 A at 125 V, 0.3 A at 220 V, 2 A at 500 V, and 0.1 A at 600 V. The main contact configuration is 18 to 8 (likely NO/NC count per the contactor block).
Lifecycle and Sourcing
For BOM freeze or second-source planning, the closest functional peer within the same SIRIUS S0 frame is the 3RT2326-1BK80. The 3RT2325-2AP00-ZX95 uses a 230 V 50 Hz AC coil; the 3RT2326-1BK80 carries a different coil voltage and auxiliary configuration. Verify coil voltage and auxiliary contact count before substituting — the mechanical footprint and DIN rail mounting are shared, so panel cutouts and wiring paths remain compatible.
Environmental and Mechanical
Operating temperature range is -25 to +60 °C; storage range is -55 to +80 °C. The contactor is rated for 10 million typical mechanical operations. Dimensions: 102 mm height, 60 mm width, 97 mm depth — fits standard S0 contactor spacing on a DIN rail.