Siemens SIRIUS 3RT2448-1NB30 contactor, Size S3, 70 mm width, screw-type coil terminals, snap-on 35 mm DIN rail mounting.
| Parameter | Value |
|---|---|
| Contactor frame size | S3 |
| Parameter | Value |
|---|---|
| Rated operational current, AC-12, max. | 10 A |
| Rated value @ 400 V | 3 A |
| Rated value @ 500 V | 2 A |
| Rated value @ 690 V | 1 A |
| Rated value @ 230 V | 6 A |
| Rated value @ 24 V | 10 A |
| Rated value @ 60 V | 2 A |
| Rated value @ 110 V | 1 A |
| Rated value @ 220 V | 0.3 A |
| Parameter | Value |
|---|---|
| Control supply voltage type | AC/DC |
| Rated value @ 50 Hz | 3.5 VA |
| Rated value @ 50 Hz | 20 ... 33 V |
| Parameter | Value |
|---|---|
| Main poles | 3 |
| Main NO contacts | 3 |
| Auxiliary contact reliability | 1 faulty switching per 100 million (17 V, 1 mA) |
| Parameter | Value |
|---|---|
| Short-circuit coordination type 1, fuse | gG: 250 A (690 V,100 kA) |
| Short-circuit coordination type 2, fuse | gR: 250 A (690 V, 100 kA) |
| Aux. switch short-circuit protection, fuse | gG: 10 A (500 V, 1 kA) |
| Parameter | Value |
|---|---|
| Main circuit connection | box terminal |
| Aux. / control circuit connection | screw-type terminals |
| Conductor cross-section, solid | 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²) |
| Conductor cross-section, solid or stranded | 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²) |
| Conductor cross-section, finely stranded w/ ferrule | 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²) |
| Mounting method | screw and snap-on mounting onto 35 mm DIN rail according to DIN EN 60715 |
| Side-by-side mounting | Yes |
| Parameter | Value |
|---|---|
| Durability (operating cycles, typ.) | 10 000 000 |
| Durability with aux. switch block (cycles, typ.) | 10 000 000 |
| Parameter | Value |
|---|---|
| Operating temperature range | -25 ... +60 °C |
| Storage temperature range | -55 ... +80 °C |
| Installation altitude, max. | 2 000 m |
| Parameter | Value |
|---|---|
| Width | 70 mm |
| Height | 140 mm |
| Depth | 152 mm |
| Parameter | Value |
|---|---|
| At AC | 38 ... 57 ms |
The 3RT2448-1NB30: The coil termination uses screw-type terminals, and an auxiliary switch is included on the contactor.
Rated coil voltage is 20 to 33 V AC/DC, with an inrush current peak of 6.5 A and a holding power draw of 3.5 VA at both 50 and 60 Hz. Main circuit wiring accepts stranded conductors from 6 to 70 mm².
No related articles