Spring-type terminals on both the coil and main circuit speed wiring: the magnet coil uses spring terminals, and the main current circuit also uses spring-loaded terminals. That means no screwdriver torque check on the line — strip, push, done. Size S00 keeps the footprint tight: 45 mm wide, 70 mm tall, 73 mm deep.
This contactor's auxiliary contacts carry a range of DC ratings that matter for control-circuit isolation. At 24 V rated value it switches 10 A; at 48 V rated value 2 A; at 60 V rated value 2 A; at 110 V rated value 1 A; at 125 V rated value 2 A; at 220 V rated value 0.3 A; at 230 V rated value 10 A; at 400 V rated value 3 A; at 440 V rated value 0.8 A; at 600 V rated value 0.1 A. AC switching rate hits 10 000 operations per hour; at AC-1 maximum it's 1 000 operations per hour. Mechanical life is typical 30 000 000 operations — that's the mechanical endurance, not the electrical, so derate for load current and switching frequency.
The solid conductor cross-section accepted is 2x (0.5 to 4 mm²) — stranded or solid, with spring terminals that grip without retightening.