DIN Rail Contactor, 95-130 V AC/DC Coil
The Siemens 3RT2626-1NF35 is a contactor with a screw-type terminal magnet coil, rated for 95-130 V AC/DC. It mounts via screw and snap-on onto 35 mm DIN rail per DIN EN 50022. Dimensions are 45 mm wide, 135 mm high, and 165 mm deep — the depth matters for enclosure clearance behind the panel, especially in shallow backboxes.
Terminal Capacity and Conductor Sizes
Solid conductors: accepts 2x (0.5-1.5 mm²), 2x (0.75-2.5 mm²), or 2x 4 mm². Stranded conductors: 2x (1-2.5 mm²) or 2x (2.5-10 mm²). The 10 mm² stranded capacity suits higher-current control circuits without needing a separate terminal block. At 40 °C ambient, the contactor accepts 1x 10 mm² solid; at 60 °C, it accepts 2x 10 mm² — the higher temperature rating allows use in warm enclosures without derating the wire entry.
Environmental and Mounting Flexibility
Operating temperature range is -25 to +60 °C; storage range is -55 to +80 °C. The wide storage envelope supports long-term spares holding in unconditioned warehouses. Mounting position allows +/-180° rotation on a vertical surface, and tilt forward/backward by +/-22.5° — useful when the contactor must fit into a crowded panel at an angle.
Lifecycle and Sourcing
Sourced through independent distribution channels.