Siemens SIRIUS power contactor, 3RT6015-1AG01, Size S00, 24 VDC coil, 6 A rated, screw terminals, 45 mm wide, 73 mm deep.
| Parameter | Value |
|---|---|
| Contactor frame size | S00 |
| Parameter | Value |
|---|---|
| Rated operational current, AC-12, max. | 10 A |
| Rated value @ 400 V | 3 A |
| Rated value @ 690 V | 1 A |
| Rated value @ 230 V | 10 A |
| Rated value @ 24 V | 6 A |
| Rated value @ 110 V | 1 A |
| Rated value @ 220 V | 0.3 A |
| Parameter | Value |
|---|---|
| Control supply voltage type | AC |
| Rated value @ 50 Hz | 0.25 |
| Rated value @ 50 Hz | 36 V |
| Parameter | Value |
|---|---|
| Main poles | 3 |
| Main NO contacts | 3 |
| Auxiliary contact reliability | 1 faulty switching per 100 million (17 V, 1 mA) |
| Parameter | Value |
|---|---|
| Short-circuit coordination type 1, fuse | gL/gG LV HRC 3NA, DIAZED 5SB, NEOZED 5SE: 35 A |
| Short-circuit coordination type 2, fuse | gL/gG LV HRC 3NA, DIAZED 5SB, NEOZED 5SE: 20 A |
| Aux. switch short-circuit protection, fuse | fuse gL/gG: 10 A |
| Parameter | Value |
|---|---|
| Main circuit connection | screw-type terminals |
| Aux. / control circuit connection | screw-type terminals |
| Conductor cross-section, solid or stranded | 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²), 2x 4 mm² |
| Conductor cross-section, finely stranded w/ ferrule | 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²) |
| Mounting method | screw and snap-on mounting onto 35 mm standard mounting rail according to DIN EN 50022 |
| Side-by-side mounting | Yes |
| Parameter | Value |
|---|---|
| Durability (operating cycles, typ.) | 30 000 000 |
| Durability with aux. switch block (cycles, typ.) | 10 000 000 |
| Parameter | Value |
|---|---|
| Operating temperature range | -25 ... +60 °C |
| Storage temperature range | -55 ... +80 °C |
| Installation altitude, max. | 2 000 m |
| Parameter | Value |
|---|---|
| Width | 45 mm |
| Height | 57.5 mm |
| Depth | 73 mm |
| Parameter | Value |
|---|---|
| At AC | 10 000 1/h |
Rated operational current is 6 A at 24 VDC, and the contactor handles motor power up to 6 kW at 230 V, 10.5 kW at 400 V, and 18 kW at 690 V (all at 60 °C). The AC-3 maximum voltage is 690 V, so it's suited for 400 V and 690 V line-fed induction motors within the current envelope.
Screw terminals accept 2x (0.5 to 1.5 mm²) solid or stranded, 2x (0.75 to 2.5 mm²), or 2x 4 mm². Minimum wire size at 40 °C and 60 °C is 2.5 mm² for the main circuit.
The depth is 73 mm, width 45 mm, height 57.5 mm — a compact Size S00 footprint that fits standard DIN-rail enclosures.
No related articles