Skip to main content
Log in
Siemens 3RT7014-1AP01 — Contactors

Siemens 3RT7014-1AP01 Contactor, Size S00, 3-Pole, AC Coil,

MPN3RT7014-1AP01

Siemens SIRIUS 3RT7014-1AP01, size S00 contactor, 3-pole main contacts, AC control supply voltage, screw-type terminals, IP20, for 35 mm DIN rail.

Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

3RT7014-1AP01 — Identification
ParameterValue
Contactor frame sizeS00
3RT7014-1AP01 — Ratings & Performance
ParameterValue
Rated value @ 400 V3 A
Rated value @ 690 V1 A
Rated value @ 230 V6 A
3RT7014-1AP01 — Control & Coil
ParameterValue
Control supply voltage typeAC
Rated value @ 50 Hz0.27
Rated value @ 50 Hz230 V
3RT7014-1AP01 — Contacts & Poles
ParameterValue
Main poles3
Main NO contacts3
Auxiliary contact reliabilityacceptability for PLC control (17 V, 5 mA)
3RT7014-1AP01 — Protection & Coordination
ParameterValue
Short-circuit coordination type 1, fusegL/gG NH 3NA: 35 A
Short-circuit coordination type 2, fusegL/gG NH 3NA: 20 A
Aux. switch short-circuit protection, fusefuse gL/gG: 10 A
3RT7014-1AP01 — Connection & Mounting
ParameterValue
Main circuit connectionscrew-type terminals
Aux. / control circuit connectionscrew-type terminals
Conductor cross-section, solid or stranded2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²)
Conductor cross-section, finely stranded w/ ferrule2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²)
Mounting methodscrew and snap-on mounting onto 35 mm standard mounting rail according to DIN EN 50022
Side-by-side mountingYes
3RT7014-1AP01 — Environmental
ParameterValue
Operating temperature range-10 ... +55 °C
Storage temperature range-25 ... +70 °C
Installation altitude, max.2 000 m
3RT7014-1AP01 — Mechanical
ParameterValue
Width45 mm
Height57.5 mm
Depth72 mm

Product details

The Siemens 3RT7014-1AP01 is a size S00 contactor with three normally open main contacts, rated for AC-3 switching duty up to 690 V. The AC-operated coil draws 0.8 W closing power and holds at 0.27 W, making it suitable for control circuits where a DC holding coil is not required. Contact reliability is specified for PLC-level signals (17 V, 5 mA), so it can switch low-energy loads like a programmable controller input without needing a separate interface relay.

Side-by-side mounting is permitted with no derating gap required.

Screw-type terminals on both the main current circuit and the auxiliary/control circuit. Accepts 2x (0.5 to 1.5 mm²) solid or stranded, or 2x (0.75 to 2.5 mm²) finely stranded with ferrule.

Protection and coordination

For type of coordination 2 (limited damage under short circuit), use a gL/gG NH 3NA fuse rated 20 A; for type of coordination 1 (no damage to the contactor), a 35 A fuse of the same type is required.

MPN
3RT7014-1AP01