Skip to main content
Log in
Siemens 3RT7037-1AM00 — Contactors

Siemens 3RT7037-1AM00 SIRIUS Contactor, S2, 3-pole, 690 V AC

MPN3RT7037-1AM00

Siemens SIRIUS S2 contactor, 3RT7037-1AM00, 3-pole, 690 V AC-3/AC-3e max, screw terminals, IP20 front, screw and snap-on mounting onto 35 mm DIN rail.

Siemens 3RT7037-1AM00 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

3RT7037-1AM00 — Identification
ParameterValue
Contactor frame sizeS2
3RT7037-1AM00 — Ratings & Performance
ParameterValue
Rated value @ 400 V3 A
Rated value @ 690 V1 A
Rated value @ 230 V6 A
3RT7037-1AM00 — Control & Coil
ParameterValue
Control supply voltage typeAC
Rated value @ 50 Hz0.36
Rated value @ 50 Hz220 V
3RT7037-1AM00 — Contacts & Poles
ParameterValue
Main poles3
Main NO contacts3
Auxiliary contact reliabilityacceptability for PLC control (17 V, 5 mA)
3RT7037-1AM00 — Protection & Coordination
ParameterValue
Short-circuit coordination type 1, fusegL/gG NH 3NA: 160 A
Short-circuit coordination type 2, fusegL/gG NH 3NA: 100 A
Aux. switch short-circuit protection, fusefuse gL/gG: 10 A
3RT7037-1AM00 — Connection & Mounting
ParameterValue
Main circuit connectionscrew-type terminals
Aux. / control circuit connectionscrew-type terminals
Conductor cross-section, solid or stranded2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²)
Conductor cross-section, finely stranded w/ ferrule2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²)
Mounting methodscrew and snap-on mounting onto 35 mm DIN rail according to DIN EN 50022
Side-by-side mountingYes
3RT7037-1AM00 — Environmental
ParameterValue
Operating temperature range-10 ... +55 °C
Storage temperature range-25 ... +70 °C
Installation altitude, max.2 000 m
3RT7037-1AM00 — Mechanical
ParameterValue
Width55 mm
Height112 mm
Depth115 mm

Product details

S2 frame, 3-pole, 690 V AC-3 — the panel builder's take

The Siemens 3RT7037-1AM00 is a SIRIUS S2-frame contactor, 3-pole normally open, rated for AC-3 and AC-3e switching up to 690 V maximum. The screw terminals on both main and auxiliary circuits accept 2x 0.5–2.5 mm² solid or ferruled stranded — standard panel wire, no special lugs needed. Front protection is IP20 — fingersafe for the operator side. The terminal area is IP00, meaning the wiring compartment needs enclosure protection from the panel builder. Pollution degree 3 (conductive or dry non-conductive pollution) suits industrial control cabinets not in a clean room.

Coordination and fuse sizing

These are the values for the main circuit — coordination data that saves a coordination study when the panel is already fused at those levels.

Frequently asked questions

What are the key ratings of 3RT7037-1AM00?

It is a 3-pole S2-frame contactor rated for AC-3 and AC-3e switching up to 690 V maximum, with screw terminals, IP20 front protection, and snap-on mounting onto 35 mm DIN rail.

What is the depth of 3RT7037-1AM00?

The depth is 115 mm, with a width of 55 mm and height of 112 mm — fits standard S2 contactor panel footprints.

MPN
3RT7037-1AM00