It carries ATEX approval DMT 98 ATEX G 001 for potentially explosive atmospheres.
The S00 frame keeps the width to 45 mm, so it nests tightly on a DIN rail alongside a matching S00 contactor without stealing extra panel space. Cage clamp terminals on both the main and auxiliary/control circuits accept 2x (0.5... 2.5 mm²) solid or 2x (0.5... 1.5 mm²) finely stranded with ferrule — no screwdriver needed, which speeds wiring in high-density panels.
Mounts standalone (no adapter plate required) on a vertical surface, rotatable ±135° and tiltable ±45° front-to-back. That zero-clearance top and bottom lets you stack relays without wasting rail space. Operating temperature -20 to +70 °C, storage/transport -55 to +80 °C, with 100 % relative humidity tolerance during operation — fine for unconditioned enclosures in washdown or outdoor cabinets as long as the front IP20 rating is respected (no water jets directly at the relay face).
The built-in auxiliary contact (N/C + N/O) is rated 1 A at 24 V, 3 A at 120 V, 2 A at 230 V, and 1 A at 400 V — AC ratings cover control-circuit switching across common control voltages. DC ratings: 0.22 A at 110 V, 0.22 A at 125 V, 0.11 A at 220 V. Surge voltage resistance rated at 6 kV, so it handles typical industrial transient conditions without external suppression on the control side.
Lifecycle status is current — no phase-out, no last-time-buy announced. The relay carries substance prohibition compliance dated 07/01/2006 (RoHS-relevant).