Rated for stand-alone installation, the relay mounts directly to a contactor base or on a DIN rail. The IP20 front protection means the operator interface is finger-safe inside an enclosure, standard for panel-mounted gear.
Termination and wiring — Cage Clamp throughout
Both main and auxiliary/control circuits use Cage Clamp terminals, accepting 2× (0.5…2.5 mm²) solid or 2× (0.5…1.5 mm²) finely stranded with ferrule. The auxiliary circuit also accepts AWG 20–14. No tools beyond a screwdriver are needed for termination — a time-saver when you're wiring a row of starters. Side clearance is 6 mm. This compact envelope means it slots into dense panel layouts without fighting for breathing room.
Operates from -20 to +70 °C and withstands storage and transport from -55 to +80 °C. Rated for 100% relative humidity during operation, and shock-resistant to 8g at 10 ms. The relay carries ATEX approval DMT 98 ATEX G 001, suiting it for potentially explosive gas atmospheres where thermal protection is required. RoHS compliance date is 07/01/2006.