It mounts directly onto a matching S00 contactor, forming a compact motor starter assembly for a control panel. Rated operational current is 0.4 A, with a Trip Class 10 characteristic — meaning it will trip within 10 seconds at 7.2× the set current, fast enough to protect standard induction motors during a stalled rotor or locked-rotor condition. The relay handles main circuit voltages up to 690 V at 50/60 Hz.
Fastens directly to a S00 contactor via the contactor mounting method — no separate DIN-rail clip needed for the relay itself, though the contactor typically snaps onto a DIN rail. The relay's screw-type terminals for both main and auxiliary circuits accept 2× (0.5…1.5 mm²) or 2× (0.75…2.5 mm²) solid or stranded wire, with a tightening torque of 0.8…1.2 N·m. Dimensions are 78 mm deep, 45 mm wide, 87 mm tall. IP20 on the front and at the terminals — suitable for enclosed panels where no washdown or dust ingress is expected. Mounting position allows rotation ±135° or tilt ±45° from vertical, giving flexibility in tight enclosures.