Skip to main content
Siemens 3RV1011-0GA25 — Motor Protection Circuit Breakers (MPCB)

Siemens 3RV1011-0GA25 SIRIUS Motor Protection Circuit Breake

MPN3RV1011-0GA25

Siemens SIRIUS, motor protection circuit breaker, 3RV1011-0GA25, 0.63 A continuous current, CLASS 10 trip class, 100 kA breaking capacity at 400 V AC, 0.18 kW rated motor power at 400 V, screw and snap-on mounting onto 35 mm DIN rail.

StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsListing updated Jul 2026

Specifications

Identification

3RV1011-0GA25 — Identification
ParameterValue
SeriesSIRIUS
Product designationcircuit breaker

Electrical

3RV1011-0GA25 — Electrical
ParameterValue
Rated voltage690 V
Rated voltage, AC-3 (max.)690 V
Rated impulse withstand voltage (Uimp)6 000 V
Number of poles3
Power loss (AC, hot)5.5 W
Power loss, per pole (AC, hot)1.8 W

Protection & Tripping

3RV1011-0GA25 — Protection & Tripping
ParameterValue
Trip classCLASS 10
Breaking capacity at 240 V (AC)100 kA
Breaking capacity at 400 V (AC)100 kA
Breaking capacity at 500 V (AC)100 kA
Breaking capacity at 690 V (AC)100 kA
Phase-failure detectionYes
Ground-fault detectionNo

Endurance & Switching

3RV1011-0GA25 — Endurance & Switching
ParameterValue
Endurance, main contacts (typ.)100 000
Switching frequency, AC-3 (max.)15 1/h

Connections

3RV1011-0GA25 — Connections
ParameterValue
Main-circuit terminal typespring-loaded terminals
Main-circuit connector arrangementfront side
Conductor cross-section, finely stranded with ferrule2x (0.25 ... 1.5 mm²)

Mechanical

3RV1011-0GA25 — Mechanical
ParameterValue
Height90 mm
Width45 mm
Depth81 mm
Mounting positionany

Environmental

3RV1011-0GA25 — Environmental
ParameterValue
Operating temperature-20 ... +60 °C
Storage temperature-50 ... +80 °C
Transport temperature-50 ... +80 °C

Specifications

3RV1011-0GA25 — Specifications
ParameterValue
Design Of The Productfor motor protection

Product details

What it is and what it does

The Siemens 3RV1011-0GA25 is a SIRIUS motor protection circuit breaker designed for motor protection. It carries a continuous current rated value of 0.63 A and a CLASS 10 trip class, meaning it will trip within 10 seconds at 7.2× rated current — fast enough to protect standard induction motors against locked-rotor conditions without nuisance tripping during normal start-up. Rated motor power is 0.18 kW at 400 V AC, which sizes this breaker for fractional-horsepower drives like small pumps, fans, or conveyor motors on a 400 V three-phase line. The breaking capacity holds at 100 kA across the full voltage range: 240 V, 400 V, 500 V, and 690 V AC — that is a high-fault rating that keeps the panel coordinated even on a stiff industrial supply.

Mounting and integration

Mounts via screw or snap-on onto a 35 mm standard mounting rail per DIN EN 50022. The 45 mm width and 90 mm height fit a standard 45 mm module slot; depth is 81 mm, which leaves clearance in most 200 mm deep enclosures. Spring-loaded terminals on the main current circuit accept 2x (0.25... 2.5 mm²) solid or stranded — no lug crimping needed for the power wires. Mounting position is any, which simplifies layout in tight panels. IP20 on the front means finger-safe when installed in a closed enclosure; no washdown rating, so keep it inside the cabinet.

Key ratings and what they mean for fit

Phase failure detection is built in — the breaker trips if one phase drops out, preventing single-phasing damage to the motor. Auxiliary switch is present (transverse design) for remote status feedback to a PLC or indicator light. The mechanical switching frequency at AC-3 duty is rated at a maximum of 15 operations per hour, which suits intermittent starting applications like conveyor indexing or batch mixing — not continuous jogging. Power dissipation in hot operating state is 5.5 W at AC — negligible for thermal budget in a standard steel enclosure. Mechanical endurance of the main contacts is typical 100,000 operations, matching the service life of the equipment it protects.

Frequently asked questions

What is the breaking capacity of 3RV1011-0GA25?

100 kA at 240 V, 400 V, 500 V, and 690 V AC — a high-fault rating that maintains selectivity on a stiff industrial supply.

Will 3RV1011-0GA25 drop into a panel specified for 3RV1011-0GA10?

Both share the same 45 mm width, 90 mm height, 81 mm depth, and 35 mm DIN rail mounting, so the mechanical fit is identical. The key difference is the continuous current rating (0.63 A vs the GA10's rating) — verify the motor FLA before swapping.

What compliance documentation is available for 3RV1011-0GA25?

The part carries SIRIUS brand documentation including RoHS and REACH compliance declarations, UL/CSA/CE certifications per the standard SIRIUS motor protection breaker line. Specific certificates are provided with the shipment or on request.

Where can I buy 3RV1011-0GA25 and how is it quoted?

Sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — submit an RFQ for a firm commercial offer.

MPN
3RV1011-0GA25