Skip to main content
Siemens 3RV1011-0JA10 — Motor Protection Circuit Breakers (MPCB)

Siemens 3RV1011-0JA10 SIRIUS Motor Protection Circuit Breake

MPN3RV1011-0JA10
Active

Siemens SIRIUS 3RV1011-0JA10, motor protection circuit breaker, 100 kA breaking capacity at 400 V, Trip Class 10, screw and snap-on 35 mm DIN rail mounting.

$83.20Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

3RV1011-0JA10 — Identification
ParameterValue
SeriesSIRIUS
Product designationCircuit breaker
Frame sizeS00
3RV1011-0JA10 — Electrical
ParameterValue
Rated operational current (Ie)1 A
Rated voltage20 ... 690 V
Rated voltage, AC-3 (max.)690 V
Rated frequency50 ... 60 Hz
Rated insulation voltage (Ui), pollution degree 3690 V
Rated impulse withstand voltage (Uimp)6 kV
Number of poles3
Power loss (AC, hot)5.5 W
Power loss, per pole (AC, hot)1.8 W
3RV1011-0JA10 — Protection & Tripping
ParameterValue
Overload release setting range0.7 ... 1 A
Instantaneous short-circuit trip current13 A
Trip classCLASS 10
Breaking capacity at 240 V (AC)100 kA
Breaking capacity at 400 V (AC)100 kA
Breaking capacity at 500 V (AC)100 kA
Breaking capacity at 690 V (AC)100 kA
Breaking capacity at 240 V100 kA
Breaking capacity at 690 V100 kA
Short-circuit trip typemagnetic
Overload release typethermal
Short-circuit protectionYes
Phase-failure detectionYes
Ground-fault detectionNo
Auxiliary switch extendableYes
3RV1011-0JA10 — Endurance & Switching
ParameterValue
Endurance, main contacts (typ.)100 000
Endurance, auxiliary contacts (typ.)100 000
Switching frequency, AC-3 (max.)15 1/h
Auxiliary CO (changeover) contacts0
3RV1011-0JA10 — Connections
ParameterValue
Main-circuit terminal typescrew-type terminals
Main-circuit connector arrangementTop and bottom
Conductor cross-section, solid / stranded2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²)
Conductor cross-section, finely stranded with ferrule2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²)
3RV1011-0JA10 — Mechanical
ParameterValue
Height90 mm
Width45 mm
Depth75 mm
Mounting methodscrew and snap-on mounting onto 35 mm DIN rail according to DIN EN 60715
Mounting positionany
3RV1011-0JA10 — Environmental
ParameterValue
Operating temperature-20 ... +60 °C
Storage temperature-50 ... +80 °C
Transport temperature-50 ... +80 °C
Relative humidity (operation)10 ... 95 %
Max. installation altitude2 000 m
3RV1011-0JA10 — Specifications
ParameterValue
Design Of The ProductFor motor protection

Product details

Rated for 20 to 690 V, it delivers a 100 kA breaking capacity at 400 V, 500 V, and 690 V — sufficient for high-fault-current industrial panels where upstream coordination is critical.

Ground fault detection is not included, so if that's required, you'll need an external ground-fault relay or a different variant. The screw-type terminals accept 2 × (0.5 to 1.5 mm²) solid or stranded, or 2 × (0.75 to 2.5 mm²) — sized for standard motor circuit wiring. Terminal screws are M3 for the main contacts.

Mounting and Integration Notes

Allow 20 mm clearance upwards and downwards for wiring and arc-chute venting; no clearance needed forwards, backwards, or at the sides.

Frequently asked questions

What is the breaking capacity of this breaker?

100 kA at 240 V, 400 V, 500 V, and 690 V AC. This is the maximum fault current the breaker can safely interrupt at those voltages.

What trip class is the 3RV1011-0JA10?

Trip Class 10, meaning it will trip within 10 seconds at 7.2× the thermal overload setting. This matches standard IEC motor starting profiles for most induction motors.

Does this breaker include phase failure protection?

Yes, phase failure detection is built in. If one phase drops out, the breaker trips on the remaining two-phase overload to prevent single-phasing motor damage.

What are the mounting dimensions?

Width 45 mm, height 90 mm, depth 75 mm. Mounts on 35 mm DIN rail per DIN EN 60715. Requires 20 mm clearance above and below, no clearance needed at sides, front, or back.

MPN
3RV1011-0JA10