Siemens SIRIUS 3RV1011-1KA10-ZW97, motor protection circuit breaker, Trip Class 10, screw and snap-on mounting onto 35 mm DIN rail, width 45 mm, depth 75 mm.
| Parameter | Value |
|---|---|
| Series | SIRIUS |
| Product designation | Circuit breaker |
| Frame size | S00 |
| Parameter | Value |
|---|---|
| Rated operational current (Ie) | 12.5 A |
| Rated voltage | 20 ... 690 V |
| Rated voltage, AC-3 (max.) | 690 V |
| Rated frequency | 50 ... 60 Hz |
| Rated insulation voltage (Ui), pollution degree 3 | 690 V |
| Rated impulse withstand voltage (Uimp) | 6 kV |
| Number of poles | 3 |
| Power loss (AC, hot) | 9.25 W |
| Power loss, per pole (AC, hot) | 3.1 W |
| Parameter | Value |
|---|---|
| Overload release setting range | 9 ... 12.5 A |
| Instantaneous short-circuit trip current | 156 A |
| Trip class | CLASS 10 |
| Breaking capacity at 240 V (AC) | 100 kA |
| Breaking capacity at 400 V (AC) | 50 kA |
| Breaking capacity at 500 V (AC) | 3 kA |
| Breaking capacity at 690 V (AC) | 2 kA |
| Breaking capacity at 240 V | 100 kA |
| Breaking capacity at 690 V | 2 kA |
| Short-circuit trip type | magnetic |
| Overload release type | thermal |
| Short-circuit protection | Yes |
| Phase-failure detection | Yes |
| Ground-fault detection | No |
| Auxiliary switch extendable | Yes |
| Parameter | Value |
|---|---|
| Endurance, main contacts (typ.) | 100 000 |
| Endurance, auxiliary contacts (typ.) | 100 000 |
| Switching frequency, AC-3 (max.) | 15 1/h |
| Auxiliary CO (changeover) contacts | 0 |
| Parameter | Value |
|---|---|
| Main-circuit terminal type | screw-type terminals |
| Main-circuit connector arrangement | Top and bottom |
| Conductor cross-section, solid / stranded | 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²) |
| Conductor cross-section, finely stranded with ferrule | 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²) |
| Parameter | Value |
|---|---|
| Height | 90 mm |
| Width | 45 mm |
| Depth | 75 mm |
| Mounting method | screw and snap-on mounting onto 35 mm DIN rail according to DIN EN 60715 |
| Mounting position | any |
| Parameter | Value |
|---|---|
| Operating temperature | -20 ... +60 °C |
| Storage temperature | -50 ... +80 °C |
| Transport temperature | -50 ... +80 °C |
| Relative humidity (operation) | 10 ... 95 % |
| Max. installation altitude | 2 000 m |
| Parameter | Value |
|---|---|
| Design Of The Product | For motor protection |
Width is 45 mm, depth 75 mm, height 90 mm. Clearance requirements: 20 mm upwards, 20 mm downwards, 9 mm at the side, 0 mm forwards and backwards — so it can sit flush against the backplane and adjacent devices can be packed tightly side-by-side at 9 mm spacing.
The part carries a product brand name of SIRIUS and is a circuit breaker design for motor protection.
The depth is 75 mm, with forwards clearance of 0 mm, so it sits flush against the backplane.
Width is 45 mm, which is the standard single-module width for this SIRIUS frame size.
Yes, both share the same 45 mm width, 75 mm depth, DIN rail mounting, screw terminals, and clearance requirements, so mechanical fit is identical. Verify the rated current range and auxiliary contact arrangement on the specific 3RV1011-1HA10 variant before committing the BOM line.
As a Siemens SIRIUS product, standard documentation includes RoHS and REACH declarations, and the part is designed to meet IEC/EN 60947-4-1 for motor protection. UL and CSA certifications are typical for the SIRIUS range; confirm the specific UL file number on the product label or request it via RFQ.
Alternative models and sibling configurations in the same Siemens series. For obsolete or discontinued parts, these models can serve as compatible replacements or functional alternatives for plant maintenance.
No related articles