Skip to main content
Siemens 3RV1021-0FA10-ZW96 — Motor Protection Circuit Breakers (MPCB)

Siemens 3RV1021-0FA10-ZW96 SIRIUS Motor Protection Breaker,

MPN3RV1021-0FA10-ZW96

Siemens SIRIUS motor protection circuit breaker, 3RV1021-0FA10-ZW96, 0.5 A rated current, 3-pole, Trip Class 10, 100 kA breaking capacity at 400 V AC, screw terminals, snap-on 35 mm DIN rail.

StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsListing updated Jul 2026

Specifications

Identification

3RV1021-0FA10-ZW96 — Identification
ParameterValue
SeriesSIRIUS
Product designationcircuit breaker

Electrical

3RV1021-0FA10-ZW96 — Electrical
ParameterValue
Rated voltage690 V
Rated voltage, AC-3 (max.)690 V
Rated impulse withstand voltage (Uimp)6 000 V
Number of poles3
Power loss (AC, hot)5.5 W
Power loss, per pole (AC, hot)1.8 W

Protection & Tripping

3RV1021-0FA10-ZW96 — Protection & Tripping
ParameterValue
Overload release setting range0.35 ... 0.5 A
Trip classCLASS 10
Breaking capacity at 240 V (AC)100 kA
Breaking capacity at 400 V (AC)100 kA
Breaking capacity at 500 V (AC)100 kA
Breaking capacity at 690 V (AC)100 kA
Phase-failure detectionYes
Ground-fault detectionNo
Auxiliary switch extendableYes

Endurance & Switching

3RV1021-0FA10-ZW96 — Endurance & Switching
ParameterValue
Auxiliary CO (changeover) contacts0

Connections

3RV1021-0FA10-ZW96 — Connections
ParameterValue
Main-circuit terminal typescrew-type terminals
Main-circuit connector arrangementfront side
Conductor cross-section, finely stranded with ferrule2x (1 ... 2.5 mm²), 2x (2.5 ... 6 mm²)
Conductor range, AWG (main contacts)2x (14 ... 10)

Mechanical

3RV1021-0FA10-ZW96 — Mechanical
ParameterValue
Height97 mm
Width45 mm
Depth96 mm
Mounting methodscrew and snap-on mounting onto 35 mm standard mounting rail according to DIN EN 50022
Mounting positionany

Environmental

3RV1021-0FA10-ZW96 — Environmental
ParameterValue
Operating temperature-20 ... +60 °C
Storage temperature-50 ... +80 °C
Transport temperature-50 ... +80 °C
Max. installation altitude2 000 m

Specifications

3RV1021-0FA10-ZW96 — Specifications
ParameterValue
Design Of The Productfor motor protection

Product details

The Siemens SIRIUS 3RV1021-0FA10-ZW96 is a 3-pole motor protection circuit breaker rated for 0.5 A continuous current, designed to protect motors against overload and short-circuit in industrial control panels. Its Trip Class 10 characteristic means it will trip within 10 seconds at 7.2x the rated current, matching the thermal curve of standard IEC induction motors during startup. The breaker carries a 100 kA breaking capacity at 400 V AC, sufficient to clear high-fault-current scenarios without upstream fuses in most panel configurations. Phase failure detection is built in, so a lost phase on the line side will trip the breaker rather than letting the motor single-phase and overheat.

Mounting and wiring

Mounts via screw and snap-on onto 35 mm standard mounting rail per DIN EN 50022. The 45 mm width fits a standard 45 mm slot in a modular enclosure. Screw-type terminals for both main and auxiliary circuits accept solid or stranded conductors: 2x (1…2.5 mm²) and 2x (2.5…6 mm²), with AWG equivalents 2x (14…10). No side clearance needed — 0 mm spacing to adjacent devices. IP20 on the front, so it's protected against finger contact but not washdown; keep it inside a closed panel.

Key ratings at a glance

Breaking capacity is 100 kA at 240 V, 400 V, 500 V, and 690 V AC — flat across the voltage range, so no derating needed for higher-voltage panels. Rated insulation voltage 690 V, surge voltage resistance 6 000 V. Operating frequency max 15 switching cycles per hour at AC-3 duty. Power dissipation 5.5 W in hot operating state (1.8 W per pole). Ambient operating range -20 to +60 °C; storage and transport -50 to +80 °C. Shock resistance 25g / 11 ms. Mounting position any.

Compliance documentation

RoHS compliance date listed as 01.05.2012, indicating the part meets EU RoHS substance restrictions. No specific UL or CSA listing is recorded in the source data, but as a Siemens SIRIUS industrial control component it typically carries IEC/EN 60947-4-1 certification for motor starters. For a specific project UL listing, verify the exact variant against the manufacturer's declaration.

Frequently asked questions

What is 3RV1021-0FA10-ZW96's depth?

96 mm depth, 45 mm width, 97 mm height.

What conductor sizes does 3RV1021-0FA10-ZW96 accept?

Solid and stranded: 2x (1…2.5 mm²) and 2x (2.5…6 mm²), AWG 2x (14…10).

Will 3RV1021-0FA10-ZW96 drop into a panel specified for 3RV1011-0GA10?

The 3RV1021-0FA10-ZW96 shares the same 45 mm width and DIN rail mounting as the 3RV1011 series, but verify the 0.5 A rating and Class 10 trip curve match your motor's FLA and startup profile before swapping.

MPN
3RV1021-0FA10-ZW96