Siemens SIRIUS 3RV1021-1BA15-ZX95 motor protection circuit breaker, 2 A rated continuous current, 0.75 kW at 400 V AC-3, Trip Class 10, 100 kA breaking capacity at 400 V, screw terminals, snap-on 35 mm DIN rail.
| Parameter | Value |
|---|---|
| Series | SIRIUS |
| Product designation | circuit breaker |
| Parameter | Value |
|---|---|
| Rated voltage | 690 V |
| Rated voltage, AC-3 (max.) | 690 V |
| Rated impulse withstand voltage (Uimp) | 6 000 V |
| Number of poles | 3 |
| Power loss (AC, hot) | 7.25 W |
| Power loss, per pole (AC, hot) | 2.4 W |
| Parameter | Value |
|---|---|
| Overload release setting range | 1.4 ... 2 A |
| Trip class | CLASS 10 |
| Breaking capacity at 240 V (AC) | 100 kA |
| Breaking capacity at 400 V (AC) | 100 kA |
| Breaking capacity at 500 V (AC) | 100 kA |
| Breaking capacity at 690 V (AC) | 8 kA |
| Phase-failure detection | Yes |
| Ground-fault detection | No |
| Auxiliary switch extendable | Yes |
| Parameter | Value |
|---|---|
| Auxiliary CO (changeover) contacts | 0 |
| Parameter | Value |
|---|---|
| Main-circuit terminal type | screw-type terminals |
| Main-circuit connector arrangement | front side |
| Conductor cross-section, finely stranded with ferrule | 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²) |
| Conductor range, AWG (main contacts) | 2x (14 ... 10) |
| Parameter | Value |
|---|---|
| Height | 97 mm |
| Width | 45 mm |
| Depth | 96 mm |
| Mounting method | screw and snap-on mounting onto 35 mm standard mounting rail according to DIN EN 50022 |
| Mounting position | any |
| Parameter | Value |
|---|---|
| Operating temperature | -20 ... +60 °C |
| Storage temperature | -50 ... +80 °C |
| Transport temperature | -50 ... +80 °C |
| Max. installation altitude | 2 000 m |
| Parameter | Value |
|---|---|
| Design Of The Product | for motor protection |
The Siemens SIRIUS 3RV1021-1BA15-ZX95 is a motor protection circuit breaker rated for 2 A continuous current, sized to protect a 0.75 kW motor at 400 V AC-3 duty. At 690 V the breaking capacity drops to 8 kA, which still covers most industrial distribution faults at that voltage.
Screw-type terminals accept solid conductors 2x (0.5…1.5 mm²) and 2x (0.75…2.5 mm²), or stranded 2x (1…2.5 mm²) and 2x (2.5…6 mm²).
Yes, phase failure detection is built in. Ground fault detection is not included.
Alternative models and sibling configurations in the same Siemens series. For obsolete or discontinued parts, these models can serve as compatible replacements or functional alternatives for plant maintenance.
No related articles