Rated at 1.25 A continuous current, it is sized for small motor loads — at 400 V AC it covers a 0.37 kW motor, which is typical for fractional-horsepower pumps, fans, or conveyor drives in light industrial lines. The headline figure here is the 100 kA breaking capacity, held flat across 240 V, 400 V, 500 V, and 690 V AC.
The 45 mm width (3-module) footprint is standard for this class; height is 97 mm, depth 96 mm. Zero clearance required backwards, zero at the sides — so it can be packed tight against other devices on the rail without derating.
Electrical and thermal limits for the specifier
Maximum operating frequency at AC-3 duty is 15 operations per hour, so this is not a high-cycling device; it is sized for occasional motor starts, not rapid jogging. Shock resistance is rated at 25g / 11 ms, which covers most industrial vibration environments including conveyor systems and machine tools.
Main and auxiliary/control circuits both use screw-type terminals. Solid and stranded conductors are accepted: 2x (1... 2.5 mm²) or 2x (2.5... 6 mm²) per clamp, with AWG equivalents of 2x (14... 10). Finely stranded with core end processing is also supported in the same ranges.
RoHS compliance is confirmed with a substance prohibition date of 01.05.2012, covering the EU RoHS directive. The part does not include ground fault detection or phase failure detection — those functions must be handled upstream in the motor protection relay or drive. The auxiliary switch extension is available as an option (product extension auxiliary switch = Yes), allowing remote status signaling.