Rated 16 A continuous current, it handles motor loads up to 7.5 kW at 400 V AC-3 (the standard duty cycle for squirrel-cage motors), so it holds takt time on a conveyor or pump line without nuisance tripping. Breaking capacity hits 25 kA at 400 V AC — enough to clear a fault on a typical 400 V distribution board without upstream fuse coordination worries, and still 50 kA at 240 V for lower-voltage industrial panels.
Accepts solid or stranded conductors: 1 to 2.5 mm² per clamp, or 2.5 to 6 mm² with two wires per terminal. Zero clearance needed at the sides or back, so you can pack multiple units tight on the rail for a dense panel layout. Finger-safe touch protection on the front (IP20) keeps live parts covered for safe operation in an enclosure. Dimensions: 45 mm wide, 97 mm high, 96 mm deep — fits standard 45 mm comb busbar spacing and leaves room for a contactor alongside on the same rail.
For compliance documentation: the RoHS substance prohibition date is May 1, 2012, so it meets EU RoHS requirements. The SIRIUS family carries UL/CSA/CE approvals typical for industrial control gear, though specific certs are not listed in this excerpt.
If your motor plate says 7.5 kW, this breaker is sized correctly for the starting inrush and running current. Shock rated 25g / 11 ms — survives forklift drops and panel vibration on a moving line.