Siemens SIRIUS 3RV2011-0FA20-ZW97, motor protection circuit breaker, size S00, 100 kA interrupting capacity at 400 V AC, Class 10 trip, screw and snap-on mounting.
| Parameter | Value |
|---|---|
| Series | SIRIUS |
| Product designation | Circuit breaker |
| Frame size | S00 |
| Parameter | Value |
|---|---|
| Rated operational current (Ie) | 0.5 A |
| Rated voltage | 20 ... 690 V |
| Rated voltage, AC-3 (max.) | 690 V |
| Rated frequency | 50 ... 60 Hz |
| Rated insulation voltage (Ui), pollution degree 3 | 690 V |
| Rated impulse withstand voltage (Uimp) | 6 kV |
| Number of poles | 3 |
| Power loss (AC, hot) | 5.5 W |
| Power loss, per pole (AC, hot) | 1.8 W |
| Parameter | Value |
|---|---|
| Overload release setting range | 0.35 ... 0.5 A |
| Instantaneous short-circuit trip current | 6.5 A |
| Trip class | CLASS 10 |
| Breaking capacity at 240 V (AC) | 100 kA |
| Breaking capacity at 400 V (AC) | 100 kA |
| Breaking capacity at 500 V (AC) | 100 kA |
| Breaking capacity at 690 V (AC) | 100 kA |
| Breaking capacity at 240 V | 100 kA |
| Breaking capacity at 690 V | 100 kA |
| Short-circuit trip type | magnetic |
| Overload release type | thermal |
| Short-circuit protection | Yes |
| Phase-failure detection | Yes |
| Ground-fault detection | No |
| Auxiliary switch extendable | Yes |
| Parameter | Value |
|---|---|
| Endurance, main contacts (typ.) | 100 000 |
| Endurance, auxiliary contacts (typ.) | 100 000 |
| Switching frequency, AC-3 (max.) | 15 1/h |
| Auxiliary CO (changeover) contacts | 0 |
| Parameter | Value |
|---|---|
| Main-circuit terminal type | spring-loaded terminals |
| Main-circuit connector arrangement | Top and bottom |
| Conductor cross-section, solid / stranded | 2x (0,5 ... 4 mm²) |
| Conductor cross-section, finely stranded with ferrule | 2x (0.5 ... 2.5 mm²) |
| Conductor range, AWG (main contacts) | 2x (20 ... 12) |
| Parameter | Value |
|---|---|
| Height | 106 mm |
| Width | 45 mm |
| Depth | 97 mm |
| Mounting method | screw and snap-on mounting onto 35 mm standard mounting rail according to DIN EN 60715 |
| Mounting position | any |
| Parameter | Value |
|---|---|
| Operating temperature | -20 ... +60 °C |
| Storage temperature | -50 ... +80 °C |
| Transport temperature | -50 ... +80 °C |
| Relative humidity (operation) | 10 ... 95 % |
| Max. installation altitude | 2 000 m |
| Parameter | Value |
|---|---|
| Design Of The Product | For motor protection |
The Class 10 trip curve ensures it disconnects before the motor windings overheat during a locked-rotor event, matching standard induction motor thermal limits.
Rated operating voltage spans 20 to 690 V AC.
Listed as current production. This is the standard catalog variant with the -ZW97 suffix.
The 3RV2011-0BA20 is a sibling in the same SIRIUS S00 frame but lacks the -ZW97 suffix marking. Both share the same size S00 footprint, 45 mm width, and snap-on DIN rail mount, so it drops into the same panel cutout. The key difference is the -ZW97 variant may carry a customer-specific setting or special marking — verify the trip current and auxiliary contact configuration against your BOM before substituting.
No related articles