Skip to main content
Siemens 3RV2011-0GA40 — Motor Protection Circuit Breakers (MPCB)

Siemens 3RV2011-0GA40 SIRIUS Motor Protection Circuit Breake

MPN3RV2011-0GA40

Siemens SIRIUS motor protection circuit breaker, size S00, 3RV2011-0GA40, Trip Class 10, 100 kA breaking capacity at 400 V AC, screw and snap-on 35 mm DIN rail mounting.

Siemens 3RV2011-0GA40 datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsListing updated Jul 2026

Specifications

Identification

3RV2011-0GA40 — Identification
ParameterValue
SeriesSIRIUS
Product designationCircuit breaker
Frame sizeS00

Electrical

3RV2011-0GA40 — Electrical
ParameterValue
Rated operational current (Ie)0.63 A
Rated voltage20 ... 690 V
Rated voltage, AC-3 (max.)690 V
Rated frequency50 ... 60 Hz
Rated insulation voltage (Ui), pollution degree 3690 V
Rated impulse withstand voltage (Uimp)6 kV
Number of poles3
Power loss (AC, hot)5.5 W
Power loss, per pole (AC, hot)1.8 W

Protection & Tripping

3RV2011-0GA40 — Protection & Tripping
ParameterValue
Overload release setting range0.45 ... 0.63 A
Instantaneous short-circuit trip current8.2 A
Trip classCLASS 10
Breaking capacity at 240 V (AC)100 kA
Breaking capacity at 400 V (AC)100 kA
Breaking capacity at 500 V (AC)100 kA
Breaking capacity at 690 V (AC)100 kA
Breaking capacity at 240 V100 kA
Breaking capacity at 690 V100 kA
Short-circuit trip typemagnetic
Overload release typethermal
Short-circuit protectionYes
Phase-failure detectionYes
Ground-fault detectionNo
Auxiliary switch extendableYes

Endurance & Switching

3RV2011-0GA40 — Endurance & Switching
ParameterValue
Endurance, main contacts (typ.)100 000
Endurance, auxiliary contacts (typ.)100 000
Switching frequency, AC-3 (max.)15 1/h
Auxiliary CO (changeover) contacts0

Connections

3RV2011-0GA40 — Connections
ParameterValue
Main-circuit terminal typeRing cable lug connection
Main-circuit connector arrangementTop and bottom

Mechanical

3RV2011-0GA40 — Mechanical
ParameterValue
Height97 mm
Width45 mm
Depth97 mm
Mounting methodscrew and snap-on mounting onto 35 mm DIN rail according to DIN EN 60715
Mounting positionany

Environmental

3RV2011-0GA40 — Environmental
ParameterValue
Operating temperature-20 ... +60 °C
Storage temperature-50 ... +80 °C
Transport temperature-50 ... +80 °C
Relative humidity (operation)10 ... 95 %
Max. installation altitude2 000 m

Specifications

3RV2011-0GA40 — Specifications
ParameterValue
Design Of The ProductFor motor protection

Product details

The Siemens 3RV2011-0GA40 is a SIRIUS motor protection circuit breaker in size S00, designed for motor protection with phase failure detection and Trip Class 10. It mounts via screw or snap-on onto 35 mm DIN rail per DIN EN 60715, in any position, and fits a panel cutout that clears 50 mm above and below, 30 mm to the side, with zero clearance forward or backward.

Breaking capacity and motor protection

Rated breaking capacity hits 100 kA at 400 V AC and 690 V AC, meaning it can safely interrupt fault currents up to that level without upstream cascading — a key figure for panel SCCR coordination. Phase failure detection is built in; ground fault detection is not. Main circuit connections use ring cable lug with M3 screws.

Integration and mounting

Fastening method is screw and snap-on onto 35 mm DIN rail; mounting position any. The S00 frame (45 mm wide, 97 mm deep) fits standard panel spacing. Ambient operating range -20 to +60 °C; storage and transport -50 to +80 °C.

Frequently asked questions

Where can I buy 3RV2011-0GA40 and how do I get a price?

This part is sourced to order against an RFQ through independent distribution. Submit an RFQ for current pricing and availability; stock and lead time are confirmed at quote time.

What is the breaking capacity of 3RV2011-0GA40 at 400 V?

The breaking capacity is 100 kA at 400 V AC, which is also the rating at 690 V AC — a high interrupt rating that supports panel SCCR coordination.

What are the mounting dimensions for 3RV2011-0GA40?

Width is 45 mm, depth 97 mm, height 97 mm. Clearance required: 50 mm above and below, 30 mm to the side, zero forward or backward. Mounts on 35 mm DIN rail per DIN EN 60715 in any position.

MPN
3RV2011-0GA40