Breaking capacity reaches 100 kA at 400 V, 480 V, 500 V, and 690 V AC — sufficient for high-fault-current panelboards where SCCR coordination is critical. The 100 kA rating at 240 V AC confirms it handles worst-case bolted faults without cascading upstream. Spring-loaded terminals on the main circuit accept 2×(0.5…2.5 mm²) solid or stranded conductors — no lug crimping needed for panel wiring.
Mounting position is any, but clearance requirements are defined: 50 mm upward, 50 mm downward, 30 mm at the side. The 97 mm depth fits standard 120 mm deep enclosures with gland plate clearance. The 106 mm height and 45 mm width allow side-by-side mounting in a 600 mm wide panel with room for wiring ducts.