Skip to main content
Siemens 3RV2011-1GA10-ZW97 — Motor Protection Circuit Breakers (MPCB)

Siemens 3RV2011-1GA10-ZW97 SIRIUS Motor Protection Circuit B

MPN3RV2011-1GA10-ZW97
Active

Siemens SIRIUS motor protection circuit breaker, 3RV2011-1GA10-ZW97, Class 10 trip, 100 kA SCCR at 400 V, 45 mm wide, screw-type terminals.

Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

3RV2011-1GA10-ZW97 — Identification
ParameterValue
SeriesSIRIUS
Product designationCircuit breaker
Frame sizeS00
3RV2011-1GA10-ZW97 — Electrical
ParameterValue
Rated operational current (Ie)6.3 A
Rated voltage20 ... 690 V
Rated voltage, AC-3 (max.)690 V
Rated frequency50 ... 60 Hz
Rated insulation voltage (Ui), pollution degree 3690 V
Rated impulse withstand voltage (Uimp)6 kV
Number of poles3
Power loss (AC, hot)7.25 W
Power loss, per pole (AC, hot)2.4 W
3RV2011-1GA10-ZW97 — Protection & Tripping
ParameterValue
Overload release setting range4.5 ... 6.3 A
Instantaneous short-circuit trip current82 A
Trip classCLASS 10
Breaking capacity at 240 V (AC)100 kA
Breaking capacity at 400 V (AC)100 kA
Breaking capacity at 500 V (AC)100 kA
Breaking capacity at 690 V (AC)6 kA
Breaking capacity at 240 V100 kA
Breaking capacity at 690 V4 kA
Short-circuit trip typemagnetic
Overload release typethermal
Short-circuit protectionYes
Phase-failure detectionYes
Ground-fault detectionNo
Auxiliary switch extendableYes
3RV2011-1GA10-ZW97 — Endurance & Switching
ParameterValue
Endurance, main contacts (typ.)100 000
Endurance, auxiliary contacts (typ.)100 000
Switching frequency, AC-3 (max.)15 1/h
Auxiliary CO (changeover) contacts0
3RV2011-1GA10-ZW97 — Connections
ParameterValue
Main-circuit terminal typescrew-type terminals
Main-circuit connector arrangementTop and bottom
Conductor cross-section, solid / stranded2x (0,75 ... 2,5 mm²), 2x 4 mm²
Conductor cross-section, finely stranded with ferrule2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²)
Conductor range, AWG (main contacts)2x (18 ... 14), 2x 12
3RV2011-1GA10-ZW97 — Mechanical
ParameterValue
Height97 mm
Width45 mm
Depth97 mm
Mounting methodscrew and snap-on mounting onto 35 mm standard mounting rail according to DIN EN 60715
Mounting positionany
3RV2011-1GA10-ZW97 — Environmental
ParameterValue
Operating temperature-20 ... +60 °C
Storage temperature-50 ... +80 °C
Transport temperature-50 ... +80 °C
Relative humidity (operation)10 ... 95 %
Max. installation altitude2 000 m
3RV2011-1GA10-ZW97 — Specifications
ParameterValue
Design Of The ProductFor motor protection

Product details

At 690 V the SCCR drops to 4 kA — still adequate for most 690 V motor circuits, but verify coordination if the available fault current exceeds that. Rated voltage range is 20 to 690 V, covering low-voltage control circuits up to 690 V line. The breaker detects phase failure but does not include ground-fault detection — that would need an add-on module or a separate ground-fault relay. No forward or backward clearance needed.

Integration — DIN Rail, Screw Terminals, Clearances

The screw-type terminals accept 2x 0.75 to 2.5 mm² solid or stranded, or 2x 4 mm². Main contact screws are M3. Mounting position is any, so horizontal or vertical panel layouts work. The 97 mm height and 45 mm width leave room for adjacent breakers or contactors in a motor starter combination.

Delta — vs. 3RV2021-1GA15 (Higher-Rated Sibling)

The 3RV2021-1GA15 is a larger frame with higher continuous current rating. The 3RV2011-1GA10-ZW97 is the 45 mm compact frame.

MPN
3RV2011-1GA10-ZW97