Skip to main content
Log in
Siemens 3RV2411-1DA20-0DA0 — Motor Protection Circuit Breakers (MPCB)

Siemens 3RV2411-1DA20-0DA0 SIRIUS Circuit Breaker, Size S00,

MPN3RV2411-1DA20-0DA0
Active

Siemens SIRIUS circuit breaker, 3RV2411-1DA20-0DA0, Size S00, for transformer protection, Trip Class 10, 100 kA breaking capacity at 400 V AC, screw and snap-on mounting on 35 mm DIN rail.

Siemens 3RV2411-1DA20-0DA0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

3RV2411-1DA20-0DA0 — Identification
ParameterValue
SeriesSIRIUS
Product designationCircuit breaker
Frame sizeS00
3RV2411-1DA20-0DA0 — Electrical
ParameterValue
Rated operational current (Ie)3.2 A
Rated voltage20 ... 690 V
Rated voltage, AC-3 (max.)690 V
Rated frequency50 ... 60 Hz
Rated insulation voltage (Ui), pollution degree 3690 V
Rated impulse withstand voltage (Uimp)6 kV
Number of poles3
Power loss (AC, hot)7.25 W
Power loss, per pole (AC, hot)2.4 W
3RV2411-1DA20-0DA0 — Protection & Tripping
ParameterValue
Overload release setting range2.2 ... 3.2 A
Instantaneous short-circuit trip current65 A
Trip classCLASS 10
Breaking capacity at 240 V (AC)100 kA
Breaking capacity at 400 V (AC)100 kA
Breaking capacity at 500 V (AC)100 kA
Breaking capacity at 690 V (AC)10 kA
Breaking capacity at 240 V100 kA
Breaking capacity at 690 V10 kA
Short-circuit trip typemagnetic
Overload release typethermal
Short-circuit protectionYes
Phase-failure detectionNo
Ground-fault detectionNo
Auxiliary switch extendableYes
3RV2411-1DA20-0DA0 — Endurance & Switching
ParameterValue
Endurance, main contacts (typ.)100 000
Endurance, auxiliary contacts (typ.)100 000
Switching frequency, AC-3 (max.)15 1/h
Auxiliary CO (changeover) contacts0
3RV2411-1DA20-0DA0 — Connections
ParameterValue
Main-circuit terminal typespring-loaded terminals
Main-circuit connector arrangementTop and bottom
Conductor cross-section, solid / stranded2x (0,5 ... 4 mm²)
Conductor cross-section, finely stranded with ferrule2x (0.5 ... 2.5 mm²)
3RV2411-1DA20-0DA0 — Mechanical
ParameterValue
Height106 mm
Width45 mm
Depth97 mm
Mounting methodscrew and snap-on mounting onto 35 mm DIN rail according to DIN EN 60715
Mounting positionany
3RV2411-1DA20-0DA0 — Environmental
ParameterValue
Operating temperature-20 ... +60 °C
Storage temperature-50 ... +80 °C
Transport temperature-50 ... +80 °C
Relative humidity (operation)10 ... 95 %
Max. installation altitude2 000 m
3RV2411-1DA20-0DA0 — Specifications
ParameterValue
Design Of The ProductFor transformer protection

Product details

Transformer-protection circuit breaker, Size S00

Rated breaking capacity reaches 100 kA at 240 V AC, 400 V AC, and 500 V AC, dropping to 10 kA at 690 V AC. At 400 V the unit is rated to clear a 25 A gG fuse-limit; at 500 V that rises to 32 A gG, and at 690 V it returns to 25 A gG.

Mounting position is any, which simplifies panel layout. Required clearance: 50 mm upwards, 50 mm downwards, 30 mm at the sides, and zero forwards or backwards — so it can sit flush against a backplate or enclosure wall. The 45 mm width and 97 mm depth fit standard S00 footprint, meaning a panel originally laid out for a 3RV2011-0BA20 or 3RV2021-1FA15 accepts this unit without re-drilling the DIN rail or re-routing wiring, provided the terminal scheme (spring-loaded terminals for the main current circuit) matches the existing lug arrangement.

The lifecycle stage is listed as current — this is an active, in-production catalog number within the SIRIUS family. No end-of-life notification or last-time-buy date is available.

Frequently asked questions

Will 3RV2411-1DA20-0DA0 replace 3RV2011-0BA20 without rewiring?

Both are Size S00 breakers on the same 45 mm DIN-rail footprint, so the mechanical fit is identical. However, the 3RV2411-1DA20-0DA0 uses spring-loaded terminals for the main circuit, while the 3RV2011-0BA20 may use screw terminals — verify the terminal type on the existing panel before assuming a direct swap.

MPN
3RV2411-1DA20-0DA0