Skip to main content
Siemens 3RV2811-0BD10 — Motor Protection Circuit Breakers (MPCB)

Siemens 3RV2811-0BD10 SIRIUS Circuit Breaker, 100 kA at 400

MPN3RV2811-0BD10
Active

Siemens SIRIUS 3RV2811-0BD10 circuit breaker, S00 size, 100 kA breaking capacity at 400 V AC, for transformer protection per UL 489, screw and snap-on 35 mm DIN rail mounting.

$69.85Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

3RV2811-0BD10 — Identification
ParameterValue
SeriesSIRIUS
Product designationCircuit breaker
Frame sizeS00
3RV2811-0BD10 — Electrical
ParameterValue
Rated operational current (Ie)0.2 A
Rated voltage20 ... 690 V
Rated voltage, AC-3 (max.)690 V
Rated frequency50 ... 60 Hz
Rated insulation voltage (Ui), pollution degree 3690 V
Rated impulse withstand voltage (Uimp)6 kV
Number of poles3
Power loss (AC, hot)5.5 W
Power loss, per pole (AC, hot)1.8 W
3RV2811-0BD10 — Protection & Tripping
ParameterValue
Instantaneous short-circuit trip current4.2 A
Breaking capacity at 240 V (AC)100 kA
Breaking capacity at 400 V (AC)100 kA
Breaking capacity at 500 V (AC)100 kA
Breaking capacity at 690 V (AC)100 kA
Breaking capacity at 240 V100 kA
Breaking capacity at 690 V100 kA
Short-circuit trip typemagnetic
Overload release typethermal
Short-circuit protectionYes
Phase-failure detectionNo
Ground-fault detectionNo
Auxiliary switch extendableYes
3RV2811-0BD10 — Endurance & Switching
ParameterValue
Endurance, main contacts (typ.)100 000
Endurance, auxiliary contacts (typ.)100 000
Switching frequency, AC-3 (max.)15 1/h
Auxiliary CO (changeover) contacts0
3RV2811-0BD10 — Connections
ParameterValue
Main-circuit terminal typescrew-type terminals
Main-circuit connector arrangementTop and bottom
Conductor cross-section, solid / stranded1 ... 10 mm², max. 2x 10 mm²
Conductor cross-section, finely stranded with ferrule1 ... 16 mm², max. 6 + 16 mm²
Conductor range, AWG (main contacts)2x (14 ... 10)
3RV2811-0BD10 — Mechanical
ParameterValue
Height144 mm
Width45 mm
Depth97 mm
Mounting methodscrew and snap-on mounting onto 35 mm DIN rail according to DIN EN 60715
Mounting positionany
3RV2811-0BD10 — Environmental
ParameterValue
Operating temperature-20 ... +60 °C
Storage temperature-50 ... +80 °C
Transport temperature-50 ... +80 °C
Relative humidity (operation)10 ... 95 %
Max. installation altitude2 000 m
3RV2811-0BD10 — Specifications
ParameterValue
Design Of The ProductFor transformer protection according to UL 489/CSA C22.2 No.5

Product details

Integrator note — SIRIUS 3RV2811-0BD10

The Siemens 3RV2811-0BD10 is a SIRIUS circuit breaker sized S00, designed specifically for transformer protection and listed under UL 489 / CSA C22.2 No.5. The 45 mm width and 97 mm depth fit a standard 45 mm-wide module slot; plan for 70 mm clearance above and below, 30 mm at the sides, zero forward or backward clearance needed. Rated voltage span covers 20 to 690 V.

Panel integration — clearance and wiring

Use a Pozidriv size 2 screwdriver with a 5 to 6 mm shaft diameter. Main contact screws are M4. Ground fault and phase failure detection are not built-in — the breaker is a straight thermal-magnetic device for transformer protection. Clearance: 70 mm above and below the breaker, 30 mm at the sides, zero forward or backward. This keeps arc-flash venting and thermal dissipation within manufacturer limits.

Frequently asked questions

Will 3RV2811-0BD10 drop into a panel that was specified around 3RV2011-0AA10 without rewiring?

Yes. Both breakers share the same S00 frame, 45 mm width, 35 mm DIN rail mounting, and M4 screw terminals accepting 1 to 10 mm² conductors. The power connections and DIN rail footprint are identical.

What compliance documentation does this brand provide for 3RV2811-0BD10?

The breaker is designed for transformer protection per UL 489 and CSA C22.2 No.5. Standard Siemens SIRIUS documentation includes RoHS and REACH declarations; the UL/CSA listing is the primary safety certification.

MPN
3RV2811-0BD10