Skip to main content
Log in
Siemens 3RV2811-1KD10 — Motor Protection Circuit Breakers (MPCB)

Siemens 3RV2811-1KD10 SIRIUS Circuit Breaker, Transformer Pr

MPN3RV2811-1KD10
Active

Siemens SIRIUS circuit breaker, 3RV2811-1KD10, size S00, for transformer protection (UL 489/CSA C22.2 No.5), 45 mm wide, screw and snap-on mounting onto 35 mm DIN rail.

Siemens 3RV2811-1KD10 datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

3RV2811-1KD10 — Identification
ParameterValue
SeriesSIRIUS
Product designationCircuit breaker
Frame sizeS00
3RV2811-1KD10 — Electrical
ParameterValue
Rated operational current (Ie)12.5 A
Rated voltage20 ... 690 V
Rated voltage, AC-3 (max.)690 V
Rated frequency50 ... 60 Hz
Rated insulation voltage (Ui), pollution degree 3690 V
Rated impulse withstand voltage (Uimp)6 kV
Number of poles3
Power loss (AC, hot)9.25 W
Power loss, per pole (AC, hot)3.1 W
3RV2811-1KD10 — Protection & Tripping
ParameterValue
Instantaneous short-circuit trip current260 A
Breaking capacity at 240 V (AC)100 kA
Breaking capacity at 400 V (AC)100 kA
Breaking capacity at 500 V (AC)42 kA
Breaking capacity at 690 V (AC)6 kA
Breaking capacity at 240 V100 kA
Breaking capacity at 690 V4 kA
Short-circuit trip typemagnetic
Overload release typethermal
Short-circuit protectionYes
Phase-failure detectionNo
Ground-fault detectionNo
Auxiliary switch extendableYes
3RV2811-1KD10 — Endurance & Switching
ParameterValue
Endurance, main contacts (typ.)100 000
Endurance, auxiliary contacts (typ.)100 000
Switching frequency, AC-3 (max.)15 1/h
3RV2811-1KD10 — Connections
ParameterValue
Main-circuit terminal typescrew-type terminals
Main-circuit connector arrangementTop and bottom
Conductor cross-section, solid / stranded1 ... 10 mm², max. 2x 10 mm²
Conductor cross-section, finely stranded with ferrule1 ... 16 mm², max. 6 + 16 mm²
Conductor range, AWG (main contacts)2x (14 ... 10)
3RV2811-1KD10 — Mechanical
ParameterValue
Height144 mm
Width45 mm
Depth97 mm
Mounting methodscrew and snap-on mounting onto 35 mm DIN rail according to DIN EN 60715
Mounting positionany
3RV2811-1KD10 — Environmental
ParameterValue
Operating temperature-20 ... +60 °C
Storage temperature-50 ... +80 °C
Transport temperature-50 ... +80 °C
Relative humidity (operation)10 ... 95 %
Max. installation altitude2 000 m
3RV2811-1KD10 — Specifications
ParameterValue
Design Of The ProductFor transformer protection according to UL 489/CSA C22.2 No.5

Product details

Transformer protection circuit breaker, size S00

The Siemens 3RV2811-1KD10 is a SIRIUS circuit breaker designed specifically for transformer protection, certified to UL 489 and CSA C22.2 No.5. Size S00 frame keeps the width to 45 mm, depth 97 mm, height 144 mm — fits standard distribution boards without gland-plate surprises. Breaking capacity hits 100 kA at 400 V AC (also 100 kA at 240 V AC), dropping to 42 kA at 500 V and 6 kA at 690 V AC.

M4 screws on the main contacts, Pozidriv size 2 tip, shaft diameter 5–6 mm. Clearance: 70 mm above and below, 30 mm to the side, 0 mm forward and backward — so the breaker can butt against the backplane and adjacent devices without extra spacing.

Current production — no end-of-life notice.

Frequently asked questions

What compliance documentation does Siemens provide for 3RV2811-1KD10?

The product is designed to UL 489 and CSA C22.2 No.5. Additional compliance docs (RoHS, REACH) are available from Siemens on request.

MPN
3RV2811-1KD10