Siemens SIRIUS 3RV6011-0CA10, size S00 motor protection circuit breaker, 3-pole, 0.25 A rated operational current, Class 10 trip, screw terminals, 45 mm width.
| Parameter | Value |
|---|---|
| Series | SIRIUS |
| Product designation | Circuit breaker |
| Frame size | S00 |
| Parameter | Value |
|---|---|
| Rated operational current (Ie) | 0.25 A |
| Rated voltage | 690 V |
| Rated voltage, AC-3 (max.) | 690 V |
| Rated frequency | 50 ... 60 Hz |
| Rated insulation voltage (Ui), pollution degree 3 | 690 V |
| Rated impulse withstand voltage (Uimp) | 6 kV |
| Number of poles | 3 |
| Parameter | Value |
|---|---|
| Overload release setting range | 0.18 ... 0.25 A |
| Instantaneous short-circuit trip current | 3.3 A |
| Trip class | CLASS 10 |
| Short-circuit trip type | magnetic |
| Overload release type | thermal |
| Short-circuit protection | Yes |
| Parameter | Value |
|---|---|
| Main-circuit terminal type | screw-type terminals |
| Main-circuit connector arrangement | Top and bottom |
| Conductor cross-section, solid / stranded | 2x (0,75 ... 2,5 mm²), 2x 4 mm² |
| Conductor cross-section, finely stranded with ferrule | 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²) |
| Conductor range, AWG (main contacts) | 2x (18 to 12), 2x (20 to 16) |
| Parameter | Value |
|---|---|
| Height | 97 mm |
| Width | 45 mm |
| Depth | 96 mm |
| Mounting method | screw and snap-on mounting onto 35 mm DIN rail according to DIN EN 60715 |
| Mounting position | any |
| Parameter | Value |
|---|---|
| Operating temperature | -20 ... +60 °C |
| Transport temperature | -50 ... +80 °C |
| Relative humidity (operation) | 10 ... 95 % |
| Max. installation altitude | 2 000 m |
| Parameter | Value |
|---|---|
| Design Of The Product | for motor protection |
The 3RV6011-0CA10: Width 45 mm, depth 96 mm, height 97 mm. Any mounting position. Clearance: 50 mm upwards, 50 mm downwards, 30 mm at the side, 0 mm forwards and backwards. Panel-builder note: the 0 mm forward/backward clearance means it sits flush against the backplane or enclosure wall — no breathing gap needed for this frame size. Screw terminal torque: 0.8 to 1.2 N·m.
Rated operational current 0.25 A at AC-3 / 400 V, Trip Class 10, rated insulation voltage 690 V, operating frequency 50/60 Hz, surge voltage resistance 6 kV, power loss 5 W total typical.
Both are size S00, 45 mm wide, 3-pole, screw terminals, same DIN rail footprint and clearance requirements. The 3RV6011-0CA10 is the standard-duty SIRIUS line; the 3RV1011-0GA10 is the high-performance variant with higher breaking capacity. Panel cutout and wiring are identical, but verify the available fault current at the panel — the 3RV1011 series carries a higher short-circuit breaking rating.
Sourced and quoted to order against an RFQ through independent industrial distribution. Availability and current pricing confirmed at quote time.
No related articles