The Siemens 3RW3013-2BB14 is a SIRIUS soft starter in frame size S00, rated 3.6 A at 40 °C ambient (derated to 3.3 A at 50 °C and 3 A at 60 °C). That 3.6 A figure governs the motor full-load current it can ramp up — for a standard 400 V three-phase induction motor, this typically covers the 0.75 kW to 1.1 kW range, depending on the motor's actual FLC. The integrated bypass contact system means the thyristors are shorted out after start, so the unit runs cool in steady state and the bypass contact carries the continuous current, not the semiconductors. Control supply is 110-230 V DC — a single wide-range DC input, not AC. That matters for panel design: if your control transformer or DC bus sits at 24 V, this unit needs a separate 110-230 V DC source. The 50-60 Hz operating frequency is the line frequency, not the control supply.
Clearance: 60 mm above, 40 mm below, 15 mm at the sides. Wire run up to 300 m from the starter to the motor — enough for most panel-to-motor distances in a plant.