Skip to main content
Siemens 3RW5072-2AB05

Siemens 3RW5072-2AB05 Soft Starter, 90 A, 200-600 V, ATEX

MPN 3RW5072-2AB05
Active

Siemens 3RW5072-2AB05 SIRIUS soft starter, 90 A minimum operating current, 200-600 V rated voltage, ATEX and IECEx certified, trip class 10A/10E/20E, screw fixing, 282 mm depth × 160 mm width × 230 mm height.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW5072-2AB05 specifications
ParameterValue
Mountingscrew fixing
Depth282 mm
Width160 mm
Height230 mm
Trip classCLASS 10 A / 10E (preset) / 20E; acc. to IEC 60947-4-2
Service factor1

Product details

Panel fit and clearance — what the dimensions mean for the enclosure

The 3RW5072-2AB05 measures 282 mm deep by 160 mm wide by 230 mm high, fastened with screw fixing to a vertical mounting surface. Clearance requirements: 5 mm at the side, 100 mm upward, 10 mm forward, 0 mm backward, and 75 mm downward — the zero backward clearance means the back of the unit can sit flush against the panel backplate, saving depth in shallow enclosures.

Hazardous-area certification — ATEX and IECEx for Zone applications

Both ATEX and IECEx certifications are listed, meaning this soft starter is approved for use in potentially explosive atmospheres per the ATEX Directive and IECEx Scheme — a requirement for oil & gas, chemical, or grain-handling installations.

Motor starting profiles — trip class and ramp functions

Trip class is selectable as CLASS 10A, 10E (preset), or 20E per IEC 60947-4-2 — this determines how long the starter can sustain locked-rotor current before tripping, with CLASS 10 being the standard for most motor starts and CLASS 20E allowing longer acceleration for high-inertia loads. Voltage Ramp and Soft Torque starting profiles are available, along with Pump Ramp Down for controlled deceleration on pump applications to prevent water hammer. Minimum load is 15% of the smallest settable Ie, so the unit can handle light-load starts without nuisance tripping — useful for unloaded conveyors or centrifugal pumps starting against a closed valve.

Fieldbus connectivity — which networks are supported

The 3RW5072-2AB05 supports PROFIBUS, Modbus RTU, Modbus TCP, EtherNet/IP, and PROFINET (with PROFIenergy capability via the PROFINET standard communication module), covering the major industrial Ethernet and fieldbus protocols for integration into most control architectures.

Thermal environment — operating range and derating

Shock resistance is 15 g for 11 ms, with potential contact lifting noted above 12 g — relevant for installations on vibrating machinery or near crushers.

MPN
3RW5072-2AB05