Skip to main content
Siemens 3RW5073-6AB04

Siemens 3RW5073-6AB04 Soft Starter, ATEX/UKEX/IECEx

MPN 3RW5073-6AB04
Active

Siemens SIRIUS 3RW5073-6AB04 soft starter, ATEX/UKEX/IECEx certified, 200-480 V, 100 A minimum, trip class 10A/10E/20E, multi-protocol communications.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW5073-6AB04 specifications
ParameterValue
Mountingscrew fixing
Depth282 mm
Width160 mm
Height230 mm
Trip classCLASS 10 A / 10E (preset) / 20E; acc. to IEC 60947-4-2
Service factor1
Digital output version2 normally-open contacts (NO) / 1 changeover contact (CO)

Product details

What this soft starter brings to a line

The Siemens 3RW5073-6AB04 is a SIRIUS soft starter rated for 200 to 480 V and a minimum setting of 100 A. It ships with trip class 10A / 10E (preset) / 20E per IEC 60947-4-2, so it matches standard motor start profiles — 10A for normal starts, 10E for extended ramp, 20E for heavy inertia loads like crushers or centrifuges. The unit carries ATEX, UKEX, and IECEx certification, meaning it is approved for installation in explosive atmospheres (gas/dust zones) where a standard soft starter would be a safety violation. That certification alone sets it apart from the bulk of the SIRIUS catalog.

Fieldbus and control integration

This soft starter supports PROFIBUS, Modbus RTU, Modbus TCP, EtherNet/IP, and PROFINET standard — five protocols on one device. That means it drops into a Siemens PLC environment over PROFINET or PROFIBUS, but also into Rockwell or third-party networks via EtherNet/IP or Modbus TCP without a gateway. The control supply voltage is not listed here, but the remote reset function is confirmed: cycling the control supply off/on resets the unit. The analog output is configurable as 4-20 mA or 0-10 V, which feeds motor current or load status to a PLC analog input or local meter.

Screw fixing is the fastening method — no DIN-rail clip on this frame. The dimensions are 160 mm wide, 230 mm high, 282 mm deep. Mounting position is flexible: vertical surface, ±90° rotatable, and ±22.5° tiltable forward/back. Shock resistance is rated at 15 g / 11 ms. That is enough for most industrial panels but worth checking if the enclosure is near a press or drop-forge.

MPN
3RW5073-6AB04