Skip to main content
Siemens 3RW5076-2AB14

Siemens 3RW5076-2AB14 Soft Starter, 200 A, 200-480 V, ATEX

MPN 3RW5076-2AB14
Active

Siemens 3RW5076-2AB14 SIRIUS soft starter, 200 A minimum, 200-480 V rated, ATEX/UKEX/IECEx certified, Class 10A/10E/20E trip, screw fixing, 160x230x282 mm.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW5076-2AB14 specifications
ParameterValue
Mountingscrew fixing
Depth282 mm
Width160 mm
Height230 mm
Trip classCLASS 10 A / 10E (preset) / 20E; acc. to IEC 60947-4-2
Service factor1

Product details

200 A soft starter for ATEX zones and motor control panels

The Siemens 3RW5076-2AB14 is a SIRIUS hybrid soft starter rated for a minimum operating current of 200 A across a 200-480 V supply range. It carries ATEX, UKEX, and IECEx certification, meaning it's approved for installation in explosive atmospheres — a requirement you don't see on every soft starter in this class.

Trip class, fieldbus, and environmental fit

Trip class is selectable between CLASS 10A, 10E (preset), and 20E per IEC 60947-4-2. Fieldbus options include PROFIBUS, Modbus RTU, Modbus TCP, and EtherNet/IP — the Modbus TCP and EtherNet/IP ports let it talk directly to a PLC without a gateway module, saving a DIN-rail slot and a configuration step. In a Gulf Coast panel that hits 50 °C inside the enclosure during summer, you'll need to account for that derating in the motor full-load current match.

Mounting and approvals for panel integration

Fastening method is screw fixing — not DIN-rail snap-on, so budget for a backplate or mounting bracket. Dimensions are 160 mm wide, 230 mm high, 282 mm deep, which fits a standard 600 mm deep enclosure with room for cabling at the rear. Clearance requirements: 100 mm upward, 10 mm forward, 75 mm downward, 5 mm at the side, 0 mm backward. The zero backward clearance means it can sit flush against the backplane — useful when you're packing multiple starters into a tight MCC section. UL and CSA approvals are both listed, so it's accepted in North American panels without a separate evaluation. CE marking is present for European installations.

MPN
3RW5076-2AB14