Skip to main content
Siemens 3RW5213-1TC15

Siemens 3RW5213-1TC15 Soft Starter, 200-600 V, Class 10A

MPN 3RW5213-1TC15
Active

Siemens 3RW5213-1TC15 soft starter, 200-600 V rated voltage, 5.5 A minimum, Class 10A/10E/20E trip class per IEC 60947-4-2, PROFIBUS/Modbus/PROFINET/EtherNet/IP, UL/CSA/CE.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW5213-1TC15 specifications
ParameterValue
Mountingscrew fixing
Depth152 mm
Width170 mm
Height275 mm
Trip classCLASS 10 A (default) / 10E / 20E; acc. to IEC 60947-4-2
Service factor1

Product details

Motor starting profile and trip class

The 3RW5213-1TC15 is a Siemens soft starter rated for 200-600 V supply, with a minimum settable current of 5.5 A. Its trip class defaults to CLASS 10A per IEC 60947-4-2, but can be configured to 10E or 20E — meaning you can match the thermal overload curve to the motor's acceleration time: 10A for standard starts under 10 seconds, 20E for longer ramp-ups like conveyors or crushers. The soft torque feature and pump ramp down function are built in — the ramp down reduces pressure surges in pumping systems by extending the deceleration profile, while soft torque limits inrush on high-inertia loads without oversizing the starter.

Fieldbus and control integration

This unit ships with PROFIBUS onboard, plus support for Modbus RTU, Modbus TCP, EtherNet/IP, and PROFINET standard — you can drop it into a Siemens S7 environment or a Rockwell plant-floor network without a separate gateway module. PROFIenergy is supported when used with the PROFINET communication module, allowing energy management profiles during idle periods. Firmware updates are field-loadable, and an error logbook is accessible with the optional accessory. Remote reset is handled by cycling the control supply voltage — no physical button press needed for automated restart sequences.

Mounting and environmental limits

The 3RW5213-1TC15 measures 170 mm wide, 275 mm high, and 152 mm deep — screw-fixing mount, with a +/-10° rotation allowance on a vertical surface. Clearance requirements: 100 mm upwards, 75 mm downwards, 10 mm forwards, 5 mm at the sides, 0 mm backwards. That backwards zero means it can sit flush against a backplate, saving panel depth. Shock rated at 15 g / 11 ms, with potential contact lifting noted at 12 g / 11 ms.

Terminal wiring and approvals

Power terminals accept solid wire: 2x (1.0-2.5 mm²) and 2x (2.5-10 mm²) — covers standard motor cable sizes up to 10 mm². UL and CSA approved, CE marked — the compliance documentation covers the major North American and European jurisdictions without extra certification legwork.

MPN
3RW5213-1TC15