Skip to main content
Siemens 3RW5213-3TC05

Siemens 3RW5213-3TC05 SIRIUS Soft Starter, 200-600 V

MPN 3RW5213-3TC05
Active

Siemens SIRIUS 3RW5213-3TC05 soft starter, 200-600 V rated, 5.5 A minimum, Class 10A/10E/20E trip, PROFIBUS/Modbus RTU/TCP/EtherNet/IP/PROFINET, screw fixing, 275 x 170 x 152 mm.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW5213-3TC05 specifications
ParameterValue
Mountingscrew fixing
Depth152 mm
Width170 mm
Height275 mm
Trip classCLASS 10 A (default) / 10E / 20E; acc. to IEC 60947-4-2
Service factor1

Product details

SIRIUS soft starter — 200-600 V, Class 10A/10E/20E trip

The Siemens 3RW5213-3TC05 is a SIRIUS hybrid switching device — a soft starter for three-phase induction motors, rated for a supply voltage range of 200 to 600 V and a minimum settable current of 5.5 A. Trip class is selectable between Class 10A (default), 10E, or 20E per IEC 60947-4-2 — this determines the allowable overload duration during start. Class 10A suits standard start times under 10 seconds; Class 20E allows longer acceleration for high-inertia loads like conveyors or centrifuges.

Fieldbus and communication options

Built-in support for PROFIBUS, Modbus RTU, Modbus TCP, EtherNet/IP, and PROFINET — the unit integrates directly into common industrial networks without an external gateway. PROFIenergy is available when used with the PROFINET standard communication module, enabling energy-management data exchange during idle periods. Firmware updates are supported in the field, matching the commissioning engineer's need to align with plant-wide software revisions.

Mounting, wiring, and clearances

Fastened via screw fixing — dimensions 275 mm height, 170 mm width, 152 mm depth. The mounting position allows +/-10° rotation and tilt forward/backward on a vertical surface. Required clearances: 100 mm upwards, 10 mm forwards, 0 mm backwards, 75 mm downwards, 5 mm at the side — these keep airflow and arc-flash separation intact.

CE marked, UL approved, CSA approved — accepted in North American and European installations without additional agency review. Rated operating temperature -25 to +60 °C during operation with derating above 40 °C — the thermal budget matters for panels with multiple drives stacked close. Shock resistance 15 g / 11 ms (12 g / 11 ms with potential contact lifting) — suitable for machine-mounted applications with moderate vibration.

MPN
3RW5213-3TC05