Skip to main content
Siemens 3RW5217-3TC15

Siemens 3RW5217-3TC15 Soft Starter, 15.5 A, 200-600 V

MPN 3RW5217-3TC15
Active

Siemens 3RW5217-3TC15 soft starter, 15.5 A minimum current, 200-600 V rated, Class 10A/10E/20E trip class, PROFIBUS and Modbus RTU/TCP, screw fixing, 275 x 170 x 152 mm.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW5217-3TC15 specifications
ParameterValue
Mountingscrew fixing
Depth152 mm
Width170 mm
Height275 mm
Trip classCLASS 10 A (default) / 10E / 20E; acc. to IEC 60947-4-2
Service factor1
Digital output version2 normally-open contacts (NO) / 1 changeover contact (CO)

Product details

Panel fit and clearance — what the dimensions mean for your cabinet

The 3RW5217-3TC15: At 275 mm tall, 170 mm wide, and 152 mm deep, this soft starter occupies a standard footprint that fits alongside motor starters in a 600 mm deep enclosure with room for the gland plate behind it. The clearance rules are specific: 100 mm above, 75 mm below, 10 mm in front, 5 mm on each side, and 0 mm behind — stack them tight against the back panel but leave the top and bottom path open for natural convection cooling. Mounting position is flexible — vertical surface with ±90° rotation and ±22.5° tilt forward or back, so you can orient it to match the busbar layout without derating the unit.

Trip class and motor starting duty — matching the load

You can also select Class 10E or 20E via the parameter set, which extends the allowable start time to 20 seconds for higher-inertia loads like centrifuges or large fans without nuisance tripping.

Fieldbus connectivity — which networks it speaks

This unit ships with PROFIBUS onboard and supports Modbus RTU, Modbus TCP, EtherNet/IP, and PROFINET (with the standard communication module), plus PROFIenergy for energy management during idle phases.

Terminal capacity and wiring — field termination without adapters

The solid wire terminals accept two conductors per position: one pair sized 1.0-2.5 mm² and another pair sized 2.5-10 mm², letting you daisy-chain the control wiring through the same clamp without separate terminal blocks.

Approvals and compliance — what the certs cover

Carries CE marking, UL approval, and CSA approval, so it qualifies for panels destined for North American and European markets without additional agency review.

Sourcing and lifecycle — current production, quoted to order

Lifecycle status is current production — no end-of-life notice on file. Sourced through authorized distribution; availability and pricing confirmed at RFQ against your BOM quantity.

MPN
3RW5217-3TC15