Skip to main content
Siemens 3RW5526-3HF14

Siemens 3RW5526-3HF14 Soft Starter, 200-480 V, ATEX

MPN 3RW5526-3HF14
Active

Siemens 3RW5526-3HF14 SIRIUS soft starter, 200-480 V rated voltage, ATEX and IECEx certified, configurable trip class, multi-protocol fieldbus support.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW5526-3HF14 specifications
ParameterValue
Mountingscrew fixing
Depth203 mm
Width185 mm
Height306 mm
Trip classCLASS 10 A / 10E (default) / 20E / 30E; acc. to IEC 60947-4-2
Service factor1.15

Product details

What this soft starter delivers

The 3RW5526-3HF14: Trip class is configurable as CLASS 10A, 10E (default), 20E, or 30E per IEC 60947-4-2, letting you match the thermal protection to the load — pump, fan, or conveyor. Starting profiles include voltage ramp, torque control, pump ramp down, breakaway pulse, and DC braking — covers soft start, controlled stop, and jogging.

Fieldbus and control integration

Supports PROFIBUS, Modbus RTU, Modbus TCP, and EtherNet/IP — drops into existing control networks without a separate gateway module. Analog output configurable as 4-20 mA or 0-10 V for motor current or torque feedback to the PLC or drive controller. Event list, error logbook, and trace function built in — useful for commissioning and fault analysis without external software.

Approvals and compliance

CE marked, UL and CSA approved — accepted in North American and European installations without additional agency review. ATEX and IECEx certification (Yes) means this unit can start motors in Zone 1 or Zone 2 classified areas when properly installed with the matching motor and cabling.

Panel mounting and clearances

Dimensions are 306 mm height, 185 mm width, 203 mm depth — fits standard 600 mm deep enclosures with room for wiring ducts. Minimum clearance requirements: 100 mm above, 75 mm below, 5 mm sides, 10 mm front, 0 mm rear — plan the panel layout accordingly for airflow and heat dissipation.

MPN
3RW5526-3HF14