What this 3RW5543-2HF04 brings to the panel
The Siemens 3RW5543-2HF04 is a SIRIUS soft starter rated 200-480 V, carrying ATEX and IECEx certification for explosive atmospheres — that is the headline for anyone sourcing into a Zone-classified line. It ships with one fail-safe output (safe state: open load circuit), meaning it can be wired directly into a safety circuit without an external safety relay for the stop function. Trip class is configurable CLASS 10A / 10E (default) / 20E / 30E per IEC 60947-4-2, so you match the motor start profile without swapping hardware.
Fieldbus and control flexibility
This unit supports PROFIBUS, Modbus RTU, Modbus TCP, and EtherNet/IP natively — no separate communication module needed for most networks. The analog output is jumper-configurable 4-20 mA or 0-10 V, covering both current-loop and voltage-input PLC cards. Control voltage is not explicitly listed in the spec, but the unit accepts a wide 200-480 V power supply; auxiliary control wiring typically follows the SIRIUS 24 VDC standard for the electronics — verify the specific control module if your system runs 24 VDC logic.
Dimensions: 210 mm wide, 393 mm tall, 203 mm deep. Requires 100 mm clearance upward, 75 mm downward, 10 mm forward, 0 mm backward. Side clearance is 5 mm.
