Skip to main content
Siemens 3SF3100-1FV00-0BA2

Siemens 3SF3100-1FV00-0BA2 Position Switch, AS-i, 1NC, IP65

MPN 3SF3100-1FV00-0BA2

Siemens SIRIUS 3SF3100-1FV00-0BA2 communication-capable position switch with AS-i adapter, 1NC positive opening contact, IP65 metal block housing per EN 50041, angular roller lever actuator, screw fixing.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3SF3100-1FV00-0BA2 specifications
ParameterValue
IP ratingIP65
Mountingscrew fixing
Temp operating max60 °C
Temp operating min-25 °C
Sensing distancemechanical

Product details

The Siemens 3SF3100-1FV00-0BA2 is a communication-capable position switch with an integrated AS-i adapter, designed for direct connection to an AS-interface network without a separate I/O module. It carries one normally-closed (NC) contact with positive opening operation per IEC 60947-5-1, meaning the NC contact is mechanically forced open when the actuator is depressed — no weld-sticking failure can leave a safety signal high. That makes it suitable for safety-related limit sensing in guarding circuits where a dropped signal must be guaranteed.

The block housing conforms to EN 50041, a standard form factor that shares the same mounting footprint and actuator positions as other EN 50041 limit switches, so it drops into existing cutouts without re-drilling the panel or machine frame. The angular roller lever actuator is designed for cam-operated or sliding-door applications where the actuating force comes at an angle rather than straight-on. Screw fixing means it mounts with standard M4 or M5 hardware through the housing slots — no adapter plate needed.

AS-i integration

Connection is via AS-i insulation displacement method, which pierces the flat AS-i cable to tap power and data — no separate tee or junction box. The switch reports its NC state directly onto the AS-i bus as a digital input, readable by any AS-i master. The painted metal enclosure provides mechanical robustness for high-cycle applications; the mechanical active principle means no solid-state electronics inside the switch body itself, just the AS-i adapter chip.

MPN
3SF3100-1FV00-0BA2