The 3SF7844-8BD24-0SS1: The 30 mm resolution means it can detect objects as small as 30 mm — typically a finger or hand — making it suitable for point-of-operation guarding where operators reach into a hazard zone. The 1650 mm protected height covers a full standing operator's reach zone, and the 0 to 18 m range gives flexibility for longer spans across a machine cell. Blanking allows certain fixed objects (like a part fixture) to be ignored without disabling the curtain, which is common in automated assembly lines. Type 4 per IEC 61496-1 is the highest safety integrity for electro-sensitive protective equipment, so this receiver integrates into a safety circuit up to SIL 3 / PL e without needing a separate safety controller for the basic function. The PROFIsafe bus connection means it plugs directly into a PROFINET safety network — no hardwired relay logic needed for the safety signal, which simplifies wiring in a modern control cabinet.
Deployment context
Mounts in a standard T-slot extrusion profile on the machine frame, with the transmitter aligned across the hazard opening. The PROFIsafe connection runs back to a safety-capable PLC.