It operates on a rated supply of 110 to 240 VAC/VDC, with a tolerance band of 0.85 to 1.1 times the rated value at both 50 and 60 Hz and for DC. The relay provides a start input and a feedback input, and includes a safety switch function. It switches up to 1 A at 24 V, 1.5 A at 115 V, and 1.5 A at 230 V, with a total current maximum of 12 A. The unit measures 22.5 mm wide, 100 mm high, and 121.6 mm deep, and mounts via screw or snap-on onto a DIN rail in any position. Shock resistance is 10g for 11 ms. Maximum power loss is 2.5 W. EMC emitted interference meets IEC 60947-5-1 Class A. Wire connection: solid 1x (20-14 AWG) or 2x (18-16 AWG); stranded 1x (20-16 AWG) or 2x (20-16 AWG); with ferrule 1x (0.5-2.5 mm²) or 2x (0.5-1.0 mm²). Typical response time is 200 ms; maximum 300 ms for AC or DC.
The SIL 3 rating means this relay is certified for use in safety circuits up to Performance Level e (EN ISO 13849-1) where a single fault cannot cause loss of the safety function — it's the level most machine-guarding and emergency-stop circuits demand. The screw and snap-on mounting means you can clip it onto the rail or bolt it down in high-vibration spots. The start input and feedback input let you wire a monitored start button and an external contactor feedback loop, which is the typical arrangement for a reset circuit that won't restart the machine automatically after a fault clears.