What's in the box — 3VA1032-2ED32-0CC0
It's a line-protection breaker — no voltage trigger, no phase failure detection, no communication module inside. The interrupting capacity hits 52.5 kA at 240 V, 32 kA at 415 V, 13.6 kA at 440 V, and 7.5 kA at 690 V, so it handles high-fault commercial and industrial panels without cascading upstream. The frame is sized for a 70 mm depth, 76.2 mm width, 130 mm height — standard 3VA footprint that drops into a DIN-rail or panel-mount enclosure. The integrated auxiliary trip is order code 3VA9608-0BB24.
At 55 °C it derates to 30.72 A, at 60 °C to 30.08 A, at 65 °C to 29.44 A, and at 70 °C to 28.8 A. That's a distribution breaker count — fine for occasional switching, not for frequent motor starting.
Sourcing and lifecycle read
If you're holding a BOM freeze and need a second-source gate, the closest functional peer in the same family is the 3VA1010-2ED42-0AE0 — same 3-pole form factor, same TM210 release family, but rated at 10 A instead of 32 A. It won't drop in without a current-rating check, but the footprint and auxiliary layout are identical. For a 32 A slot, stick with this order code.
Depth of 70 mm leaves room behind a 120 mm deep enclosure door for wiring and the auxiliary switch terminals. Height of 130 mm fits under most standard busbar risers. The undervoltage release (UVR) is factory-fitted — verify your control voltage matches the release coil rating before energizing. No communication module means no Modbus or PROFIBUS; if you need remote monitoring, you'll add an external I/O block.