Siemens SENTRON 3VA1116-3ED32-0AA0, molded case circuit breaker, 3-pole, 160 A, TM210 thermal-magnetic release, line protection, 70 mm depth.
| Parameter | Value |
|---|---|
| Product designation | Molded case circuit breaker |
| Brand / range | SENTRON |
| Parameter | Value |
|---|---|
| Number of poles | 3 |
| Rated operational voltage Ue (AC) | 690 V |
| Rated insulation voltage Ui | 800 V |
| Current at 40 °C | 160 A |
| Current at 45 °C | 160 A |
| Current at 50 °C | 160 A |
| Current at 55 °C | 158 A |
| Current at 60 °C | 155 A |
| Current at 65 °C | 153 A |
| Current at 70 °C | 150 A |
| Switching capacity class | N |
| Breaking capacity at 240 V | 75.6 kA |
| Breaking capacity at 415 V | 52.5 kA |
| Breaking capacity at 440 V | 32 kA |
| Breaking capacity at 500 V | 11.9 kA |
| Breaking capacity at 690 V | 11.9 kA |
| Power loss, max. | 38 W |
| Parameter | Value |
|---|---|
| Overcurrent release (trip unit) type | TM210 |
| Overcurrent protection function | LI |
| Ground-fault monitoring | Without |
| Grounding protection function | No |
| Parameter | Value |
|---|---|
| Main circuit connection type | nut keeper kit on both ends |
| Main circuit connector arrangement | Front terminal |
| Protection class (IP), front | IP40 |
| Parameter | Value |
|---|---|
| Undervoltage release | No |
| Voltage trigger | No |
| Trip indicator | No |
| Communication function | No |
| Measurement function | No |
| Motor drive option | Yes |
| Auxiliary CO contacts | 0 |
| Parameter | Value |
|---|---|
| Operating temperature, max. | 70 °C |
| Operating temperature, min. | -25 °C |
| Storage temperature, max. | 80 °C |
| Storage temperature, min. | -40 °C |
| Parameter | Value |
|---|---|
| Mechanical service life (operating cycles), typ. | 20 000 |
| Height | 130 mm |
| Width | 76.2 mm |
| Depth | 70 mm |
| Height (in) | 5.12 in |
| Width (in) | 3 in |
| Depth (in) | 2.76 in |
The 3-pole design fits three-phase feeders. Breaking capacity is voltage-dependent: 75.6 kA at 240 V, 52.5 kA at 415 V, 32 kA at 440 V, and 11.9 kA at both 500 V and 690 V.
If the panel runs hot — near a transformer or in a crowded enclosure — use the 60 °C column (155 A) or 70 °C column (150 A) for your load calculation. The breaker measures 70 mm deep, 76.2 mm wide, and 130 mm high, so it occupies a standard 3-pole MCCB footprint on the DIN rail or mounting plate.
This part is sourced and quoted to order against an RFQ through independent distribution. Submit an RFQ for current availability and pricing — no stock or price figures are published here.
Breaking capacity is 75.6 kA at 240 V, 52.5 kA at 415 V, 32 kA at 440 V, and 11.9 kA at both 500 V and 690 V.
Both are 3-pole SENTRON MCCBs in the same 3VA frame family, so the mounting footprint and bus-bar spacing are identical. The main difference is the overcurrent release: this unit uses a TM210 release rated 160 A, while the 3VA1112-5EE32-0AA0 uses a different release and lower amp rating. Verify the load current and release coordination before swapping — the physical fit is the same, but the protection settings are not.
No related articles