Skip to main content
Siemens 3VA1116-5EF36-0BA0 — Molded Case Circuit Breakers (MCCB)

Siemens 3VA1116-5EF36-0BA0 SENTRON MCCB, 160 A, 187 kA at 24

MPN3VA1116-5EF36-0BA0

Siemens SENTRON 3VA1116-5EF36-0BA0, molded case circuit breaker, 3-pole, 160 A, TM240, line protection, IP40 front.

StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsListing updated Jul 2026

Specifications

Identification

3VA1116-5EF36-0BA0 — Identification
ParameterValue
Product designationMolded case circuit breaker
Brand / rangeSENTRON
Product versionLine protection

Ratings

3VA1116-5EF36-0BA0 — Ratings
ParameterValue
Number of poles3
Current at 40 °C160 A
Current at 45 °C160 A
Current at 50 °C160 A
Current at 55 °C153.6 A
Current at 60 °C150.4 A
Current at 65 °C147.2 A
Current at 70 °C144 A
Switching capacity classM
Breaking capacity at 240 V187 kA
Breaking capacity at 415 V121 kA
Breaking capacity at 440 V75.6 kA
Breaking capacity at 690 V17 kA

Protection & Trip Unit

3VA1116-5EF36-0BA0 — Protection & Trip Unit
ParameterValue
Overcurrent release (trip unit) typeTM240

Construction & Connection

3VA1116-5EF36-0BA0 — Construction & Connection
ParameterValue
Main circuit connection typebox terminal
Main circuit connector arrangementFront terminal
Protection class (IP), frontIP40

Accessories & Functions

3VA1116-5EF36-0BA0 — Accessories & Functions
ParameterValue
Undervoltage releaseYes
Voltage triggerNo
Trip indicatorNo
Communication functionNo
Measurement functionNo
Motor drive optionYes
Auxiliary CO contacts0

Environmental

3VA1116-5EF36-0BA0 — Environmental
ParameterValue
Operating temperature, max.70 °C
Operating temperature, min.-25 °C
Storage temperature, max.80 °C
Storage temperature, min.-40 °C

Mechanical

3VA1116-5EF36-0BA0 — Mechanical
ParameterValue
Height130 mm
Width76.2 mm
Depth70 mm

Product details

MCCB for line protection — 160 A, high interrupting capacity

The Siemens 3VA1116-5EF36-0BA0 is a 3-pole SENTRON molded case circuit breaker rated for line protection at 160 A continuous current (Iu). It carries a TM240 thermal-magnetic overcurrent release and an integrated undervoltage release (UVR) — the auxiliary trip coil specified as 3VA9608-0BB11. This MCCB is designed for main feeder or large branch protection in distribution panels where fault current levels are high. Interrupting capacity is the headline spec here: 187 kA at 240 V, 121 kA at 415 V, 75.6 kA at 440 V, and 17 kA at 690 V. That puts it in the high-fault-current tier — suitable for service-entrance or transformer-fed switchboards where downstream breakers need a high SCCR upstream to coordinate. The rated insulation voltage is 800 V, so it's also usable on 690 V systems with adequate clearance. Thermal derating is published across the full operating range: full 160 A up to 50 °C, then steps down to 153.6 A at 55 °C, 150.4 A at 60 °C, 147.2 A at 65 °C, and 144 A at 70 °C. If the panel ambient runs hot — say near a transformer or in a non-climate-controlled enclosure — use the 50 °C column as your sizing baseline; the breaker won't trip prematurely on a warm day.

Integration — panel fit and wiring

Dimensions: 130 mm tall, 76.2 mm wide, 70 mm deep. The 76.2 mm width is a standard 3-pole MCCB footprint — fits most DIN-rail or direct-mount panel layouts without special adapters. IP40 on the front means the breaker face is protected against tools and small wires, but the enclosure itself must provide the overall panel IP rating. No auxiliary contacts or ground-fault module are included; those are add-on options if needed. Operating temperature range is -25 °C to 70 °C; storage range is -40 °C to 80 °C. The breaker is rated for 15,000 mechanical latching endurance cycles — typical for a fixed-mounted MCCB in a distribution panel that sees infrequent switching. No communication function, no phase-failure detection, and no voltage trigger are built in; this is a straightforward thermal-magnetic protective device.

Frequently asked questions

What are the key interrupting ratings for this MCCB?

At 240 V it interrupts 187 kA; at 415 V, 121 kA; at 440 V, 75.6 kA; at 690 V, 17 kA. These are the short-circuit current ratings at the respective voltages.

Where can I buy the 3VA1116-5EF36-0BA0?

This part is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time.

Does this breaker include an undervoltage release?

Yes, it is equipped with an undervoltage release (UVR) as the auxiliary trip; the release coil order code is 3VA9608-0BB11.

MPN
3VA1116-5EF36-0BA0