The Siemens SENTRON 3VA1220-6EF32-0AJ0 is a 3-pole molded case circuit breaker rated for 200 A continuous current at 40 °C, with a TM240 thermal-magnetic overcurrent release.
At 55 °C it derates to 194 A, at 60 °C to 188 A, at 65 °C to 182 A, and at 70 °C to 176 A. The interrupting ratings span four voltage levels: 220 kA at 240 V, 154 kA at 415 V, 36 kA at 440 V, and 17 kA at 690 V. That 220 kA figure covers the high-end utility fault duty common in North American 240 V delta services. At 690 V the 17 kA still clears most industrial motor-circuit faults, but verify against your transformer nameplate if you're feeding a 690 V drive bus. It's a straightforward line-protection device for feeder or main breaker duty where you don't need selective coordination curves. That gives you two NO/NC status signals for PLC or indication and a dedicated alarm contact that latches on a trip event — useful for remote fault annunciation without tying up the aux contacts.