Siemens SENTRON 3VA2010-4HM42-0AA0, molded case circuit breaker, 4-pole, 100 A rated, 121 kA breaking at 240 V, line protection design.
| Parameter | Value |
|---|---|
| Product designation | Molded case circuit breaker |
| Brand / range | SENTRON |
| Parameter | Value |
|---|---|
| Number of poles | 4 |
| Rated operational voltage Ue (AC) | 690 V |
| Rated insulation voltage Ui | 800 V |
| Current at 40 °C | 100 A |
| Current at 45 °C | 100 A |
| Current at 50 °C | 100 A |
| Current at 55 °C | 100 A |
| Current at 60 °C | 100 A |
| Current at 65 °C | 100 A |
| Current at 70 °C | 100 A |
| Switching capacity class | S |
| Breaking capacity at 240 V | 121 kA |
| Breaking capacity at 415 V | 75.6 kA |
| Breaking capacity at 440 V | 75.6 kA |
| Breaking capacity at 500 V | 52.5 kA |
| Breaking capacity at 690 V | 3 kA |
| Power loss, max. | 13.5 W |
| Parameter | Value |
|---|---|
| Overcurrent release (trip unit) type | ETU330 |
| Overcurrent protection function | LIG |
| Ground-fault monitoring | Summation current formation L + N conductor |
| Grounding protection function | Yes |
| Parameter | Value |
|---|---|
| Main circuit connection type | on both sides nut keeper kit |
| Main circuit connector arrangement | Front terminal |
| Protection class (IP), front | IP40 |
| Parameter | Value |
|---|---|
| Undervoltage release | No |
| Voltage trigger | No |
| Trip indicator | No |
| Communication function | No |
| Measurement function | No |
| Motor drive option | Yes |
| Auxiliary CO contacts | 0 |
| Parameter | Value |
|---|---|
| Operating temperature, max. | 70 °C |
| Operating temperature, min. | -25 °C |
| Storage temperature, max. | 80 °C |
| Storage temperature, min. | -40 °C |
| Parameter | Value |
|---|---|
| Mechanical service life (operating cycles), typ. | 25 000 |
| Height | 181 mm |
| Width | 140 mm |
| Depth | 86 mm |
| Height (in) | 7.13 in |
| Width (in) | 5.51 in |
| Depth (in) | 3.39 in |
It carries a 121 kA breaking capacity at 240 V AC, stepping down to 75.6 kA at 415/440 V, 52.5 kA at 500 V, and 3 kA at 690 V — the SCCR you need depends on your system voltage and fault current available.
The 4-pole configuration (switched neutral) is typical for TN-S or IT systems where you need full isolation. Breaking capacity at 240 V (121 kA) covers high-fault utility feeds; at 690 V the 3 kA limit means this breaker is not for 690 V motor circuits unless the fault current is very low.
Siemens SENTRON products typically carry UL, CSA, CE, and IEC certifications, and RoHS/REACH declarations are available on request. Specific certs for this order code should be confirmed at quote time.
No related articles