Skip to main content
Siemens 3VA2010-5JQ32-0DC0 — Molded Case Circuit Breakers (MCCB)

Siemens 3VA2010-5JQ32-0DC0 SENTRON MCCB, 100A 3-Pole, 187kA

MPN3VA2010-5JQ32-0DC0

Siemens SENTRON 3VA2010-5JQ32-0DC0, molded case circuit breaker, 3-pole, 100 A full-scale, line protection with undervoltage release and communication function.

StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsListing updated Jul 2026

Specifications

Identification

3VA2010-5JQ32-0DC0 — Identification
ParameterValue
Product designationMolded case circuit breaker
Brand / rangeSENTRON
Basic switch (supplied) ref.3VA20105JQ320AA0
Integrated auxiliary / alarm switch ref.3VA9988-0AA12

Ratings

3VA2010-5JQ32-0DC0 — Ratings
ParameterValue
Number of poles3
Rated operational voltage Ue (AC)690 V
Rated insulation voltage Ui800 V
Current at 40 °C100 A
Current at 45 °C100 A
Current at 50 °C100 A
Current at 55 °C100 A
Current at 60 °C100 A
Current at 65 °C100 A
Current at 70 °C100 A
Switching capacity classM
Breaking capacity at 240 V187 kA
Breaking capacity at 415 V121 kA
Breaking capacity at 440 V121 kA
Breaking capacity at 500 V75.6 kA
Breaking capacity at 690 V3 kA
Power loss, max.16 W

Protection & Trip Unit

3VA2010-5JQ32-0DC0 — Protection & Trip Unit
ParameterValue
Overcurrent release (trip unit) typeETU560
Overcurrent protection functionLSIG
Ground-fault monitoringSummation current formation L-conductor
Grounding protection functionYes

Construction & Connection

3VA2010-5JQ32-0DC0 — Construction & Connection
ParameterValue
Main circuit connection typeon both sides nut keeper kit
Main circuit connector arrangementFront terminal
Protection class (IP), frontIP40

Accessories & Functions

3VA2010-5JQ32-0DC0 — Accessories & Functions
ParameterValue
Undervoltage releaseYes
Voltage triggerNo
Trip indicatorNo
Communication functionYes
Measurement functionNo
Motor drive optionYes
Auxiliary CO contacts2

Environmental

3VA2010-5JQ32-0DC0 — Environmental
ParameterValue
Operating temperature, max.70 °C
Operating temperature, min.-25 °C
Storage temperature, max.80 °C
Storage temperature, min.-40 °C

Mechanical

3VA2010-5JQ32-0DC0 — Mechanical
ParameterValue
Mechanical service life (operating cycles), typ.25 000
Height181 mm
Width105 mm
Depth86 mm
Height (in)7.13 in
Width (in)4.13 in
Depth (in)3.39 in

Product details

The Siemens 3VA2010-5JQ32-0DC0 is a SENTRON molded case circuit breaker (MCCB) rated for line protection duty. It carries a full-scale current setting of 100 A across the full ambient temperature range from 40 °C to 70 °C, with no derating needed up to that ceiling — the thermal curve holds flat at 100 A from 40 °C through 70 °C. That means you can install it in a warm panel or near other heat sources without recalculating the trip point.

Breaking capacity and selectivity headroom

Breaking capacity is the headline number that decides whether this MCCB clears a fault before the upstream device. At 240 V it interrupts 187 kA; at 415 V and 440 V it holds 121 kA; at 500 V it still manages 75.6 kA. Only at 690 V does it drop to 3 kA — that is the limit for 690 V line-to-line applications. For a 400 V distribution panel, 121 kA gives generous selectivity headroom against a transformer or a larger upstream MCCB.

Adjustable trip and auxiliary functions

The adjustable overload trip range spans 150 A minimum to 1 200 A maximum, with an initial setting of 20 A. That wide band lets you tune the long-time pickup to the actual load without swapping the breaker body. An undervoltage release (UVR) is built in — it trips the breaker when control voltage drops, which is standard for emergency-stop chains and safety circuits that need a guaranteed open on power loss. Two auxiliary switches (HQ design) are fitted for remote status indication. Communication function is included, so the breaker can report its state to a BMS or PLC over the SENTRON communication bus.

Physical fit and panel integration

The 3VA2010-5JQ32-0DC0 measures 181 mm high, 105 mm wide, and 86 mm deep — a standard 3-pole MCCB footprint that fits most SENTRON distribution panels and retrofit slots. The 105 mm width is the pole pitch; verify the busbar or plug-in base spacing before committing the cutout. Power loss is 16 W maximum, which is moderate for a 100 A frame; factor it into the enclosure thermal calculation if you are packing multiple breakers in a sealed cabinet.

Frequently asked questions

How do I get current pricing and availability for 3VA2010-5JQ32-0DC0?

Submit an RFQ. Pricing and stock levels are confirmed at quote time through our independent distribution network. No online price or live count is published for this industrial line item.

What is the closest functional second-source to 3VA2010-5JQ32-0DC0?

Within the SENTRON family, the 3VA1110-5EF32-0AM0 is a peer — also a 3-pole MCCB with line protection. The deciding difference is the frame size and breaking capacity: the 3VA2010 carries 187 kA at 240 V, while the 3VA1110 series typically offers a lower interrupting rating. Verify the SCCR requirement before substituting.

What compliance documentation is available for 3VA2010-5JQ32-0DC0?

As a Siemens SENTRON product, this MCCB is designed to meet IEC 60947-2 and UL 489 standards. RoHS and REACH declarations are standard from Siemens. Specific certificate numbers should be requested with the RFQ.

MPN
3VA2010-5JQ32-0DC0