Siemens SENTRON 3VA2010-6HN36-0AF0, molded case circuit breaker, 3-pole, 100 A continuous current, 242 kA breaking capacity at 240 VAC, line protection design.
| Parameter | Value |
|---|---|
| Product designation | Molded case circuit breaker |
| Brand / range | SENTRON |
| Basic switch (supplied) ref. | 3VA20106HN360AA0 |
| Integrated auxiliary / alarm switch ref. | 3VA9988-0AB12 |
| Parameter | Value |
|---|---|
| Number of poles | 3 |
| Rated operational voltage Ue (AC) | 690 V |
| Rated insulation voltage Ui | 800 V |
| Current at 40 °C | 100 A |
| Current at 45 °C | 100 A |
| Current at 50 °C | 100 A |
| Current at 55 °C | 100 A |
| Current at 60 °C | 100 A |
| Current at 65 °C | 100 A |
| Current at 70 °C | 100 A |
| Switching capacity class | H |
| Breaking capacity at 240 V | 242 kA |
| Breaking capacity at 415 V | 187 kA |
| Breaking capacity at 440 V | 187 kA |
| Breaking capacity at 500 V | 121 kA |
| Breaking capacity at 690 V | 3 kA |
| Power loss, max. | 13.5 W |
| Parameter | Value |
|---|---|
| Overcurrent release (trip unit) type | ETU350 |
| Overcurrent protection function | LSI |
| Ground-fault monitoring | Without |
| Grounding protection function | No |
| Parameter | Value |
|---|---|
| Main circuit connection type | double-sided box terminal |
| Main circuit connector arrangement | Front terminal |
| Protection class (IP), front | IP40 |
| Parameter | Value |
|---|---|
| Undervoltage release | No |
| Voltage trigger | No |
| Trip indicator | Yes |
| Communication function | No |
| Measurement function | No |
| Motor drive option | Yes |
| Auxiliary CO contacts | 2 |
| Parameter | Value |
|---|---|
| Operating temperature, max. | 70 °C |
| Operating temperature, min. | -25 °C |
| Storage temperature, max. | 80 °C |
| Storage temperature, min. | -40 °C |
| Parameter | Value |
|---|---|
| Mechanical service life (operating cycles), typ. | 25 000 |
| Height | 181 mm |
| Width | 105 mm |
| Depth | 86 mm |
| Height (in) | 7.13 in |
| Width (in) | 4.13 in |
| Depth (in) | 3.39 in |
It carries a 242 kA breaking capacity at 240 VAC, dropping to 187 kA at 415 V and 440 V, 121 kA at 500 V, and 3 kA at 690 V — so the interrupting rating is voltage-dependent, and the 690 V figure is the one to watch if you're on a 690 V corner-grounded delta or IT system.
Maximum power loss is 13.5 W, which is modest for a 100 A MCCB and keeps the enclosure heat rise manageable in a crowded panel.
The breaking capacity is 242 kA at 240 VAC, 187 kA at 415 V and 440 V, 121 kA at 500 V, and 3 kA at 690 V — the interrupting rating drops significantly at higher voltages, so match it to your system voltage.
Height is 181 mm, width is 105 mm, depth is 86 mm — a standard 3-pole MCCB footprint for 100 A class.
This part is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — submit an RFQ for a firm quote.
As a SENTRON series MCCB, this part carries the standard Siemens compliance documentation including RoHS and REACH declarations, and is designed to meet IEC 60947-2 and UL 489 standards. Specific certificates are available on request.
Alternative models and sibling configurations in the same Siemens series. For obsolete or discontinued parts, these models can serve as compatible replacements or functional alternatives for plant maintenance.
No related articles