Siemens SENTRON molded case circuit breaker, 3VA2010-6JQ36-0AA0, 3-pole, 100 A continuous rating, line protection, breaking capacity 242 kA at 240 V, 187 kA at 415 V, 121 kA at 500 V, 3 kA at 690 V.
| Parameter | Value |
|---|---|
| Product designation | Molded case circuit breaker |
| Brand / range | SENTRON |
| Parameter | Value |
|---|---|
| Number of poles | 3 |
| Rated operational voltage Ue (AC) | 690 V |
| Rated insulation voltage Ui | 800 V |
| Current at 40 °C | 100 A |
| Current at 45 °C | 100 A |
| Current at 50 °C | 100 A |
| Current at 55 °C | 100 A |
| Current at 60 °C | 100 A |
| Current at 65 °C | 100 A |
| Current at 70 °C | 100 A |
| Switching capacity class | H |
| Breaking capacity at 240 V | 242 kA |
| Breaking capacity at 415 V | 187 kA |
| Breaking capacity at 440 V | 187 kA |
| Breaking capacity at 500 V | 121 kA |
| Breaking capacity at 690 V | 3 kA |
| Power loss, max. | 13.5 W |
| Parameter | Value |
|---|---|
| Overcurrent release (trip unit) type | ETU560 |
| Overcurrent protection function | LSIG |
| Ground-fault monitoring | Summation current formation L-conductor |
| Grounding protection function | Yes |
| Parameter | Value |
|---|---|
| Main circuit connection type | double-sided box terminal |
| Main circuit connector arrangement | Front terminal |
| Protection class (IP), front | IP40 |
| Parameter | Value |
|---|---|
| Undervoltage release | No |
| Voltage trigger | No |
| Trip indicator | No |
| Communication function | Yes |
| Measurement function | No |
| Motor drive option | Yes |
| Auxiliary CO contacts | 0 |
| Parameter | Value |
|---|---|
| Operating temperature, max. | 70 °C |
| Operating temperature, min. | -25 °C |
| Storage temperature, max. | 80 °C |
| Storage temperature, min. | -40 °C |
| Parameter | Value |
|---|---|
| Mechanical service life (operating cycles), typ. | 25 000 |
| Height | 181 mm |
| Width | 105 mm |
| Depth | 86 mm |
| Height (in) | 7.13 in |
| Width (in) | 4.13 in |
| Depth (in) | 3.39 in |
It carries a breaking capacity of 242 kA at 240 V, 187 kA at 415 V and 440 V, 121 kA at 500 V, and 3 kA at 690 V — the 690 V figure is the weak point to watch if your system runs at that voltage; the breaker still interrupts but at a much lower fault level.
Continuous current: 100 A (adjustable from 20 A to 100 A full-scale). Insulation voltage rated at 800 V. No undervoltage release or trip indicator fitted on this variant.
Submit an RFQ through this listing. We source this part to order and confirm pricing and availability at quote time — no stock figures or prices are shown here because they change daily.
At 240 V it interrupts 242 kA; at 415 V and 440 V, 187 kA; at 500 V, 121 kA; and at 690 V, 3 kA. The 690 V figure is the limiting case — if your fault current exceeds 3 kA at that voltage, this breaker won't clear it.
Yes, it uses summation current formation on the L-conductor for ground-fault monitoring.
No related articles