Siemens SENTRON 3VA series, molded case circuit breaker, 3VA2216-5HM32-0AA0, 160 A rated current, 3-pole, line protection design.
| Parameter | Value |
|---|---|
| Product designation | Molded case circuit breaker |
| Brand / range | SENTRON |
| Parameter | Value |
|---|---|
| Number of poles | 3 |
| Rated operational voltage Ue (AC) | 690 V |
| Rated insulation voltage Ui | 800 V |
| Current at 40 °C | 160 A |
| Current at 45 °C | 160 A |
| Current at 50 °C | 160 A |
| Current at 55 °C | 160 A |
| Current at 60 °C | 160 A |
| Current at 65 °C | 160 A |
| Current at 70 °C | 160 A |
| Switching capacity class | M |
| Breaking capacity at 240 V | 187 kA |
| Breaking capacity at 415 V | 121 kA |
| Breaking capacity at 440 V | 121 kA |
| Breaking capacity at 500 V | 75.6 kA |
| Breaking capacity at 690 V | 4.5 kA |
| Power loss, max. | 19.7 W |
| Parameter | Value |
|---|---|
| Overcurrent release (trip unit) type | ETU330 |
| Overcurrent protection function | LIG |
| Ground-fault monitoring | Summation current formation L-conductor |
| Grounding protection function | Yes |
| Parameter | Value |
|---|---|
| Main circuit connection type | on both sides nut keeper kit |
| Main circuit connector arrangement | Front terminal |
| Protection class (IP), front | IP40 |
| Parameter | Value |
|---|---|
| Undervoltage release | No |
| Voltage trigger | No |
| Trip indicator | No |
| Communication function | No |
| Measurement function | No |
| Motor drive option | Yes |
| Auxiliary CO contacts | 0 |
| Parameter | Value |
|---|---|
| Operating temperature, max. | 70 °C |
| Operating temperature, min. | -25 °C |
| Storage temperature, max. | 80 °C |
| Storage temperature, min. | -40 °C |
| Parameter | Value |
|---|---|
| Mechanical service life (operating cycles), typ. | 25 000 |
| Height | 181 mm |
| Width | 105 mm |
| Depth | 86 mm |
| Height (in) | 7.13 in |
| Width (in) | 4.13 in |
| Depth (in) | 3.39 in |
It carries a breaking capacity of 187 kA at 240 V, 121 kA at 415 V and 440 V, 75.6 kA at 500 V, and 4.5 kA at 690 V — so it handles high-fault-current scenarios typical of industrial mains and feeder circuits.
The 3-pole design with line-protection function means it is wired into the incoming feeder, not downstream branch circuits. Power loss is 19.7 W maximum at rated load, which matters for thermal management inside a sealed enclosure.
This part is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time.
Breaking capacity is 187 kA at 240 V, 121 kA at 415 V and 440 V, 75.6 kA at 500 V, and 4.5 kA at 690 V.
Yes, it includes ground-fault monitoring using summation current formation on the L-conductor.
No related articles