The Siemens SENTRON 3VA2220-7MN32-0HL0 is a 3-pole molded case circuit breaker (MCCB) rated for 200 A continuously across the full 40 °C to 70 °C ambient range — no derating needed as the panel warms up, which is a solid feature for a crowded enclosure. It's designed specifically for motor protection, with phase failure detection and a trip indicator built in.
This breaker's short-circuit rating changes with system voltage — something to keep in mind when you're specifying for a mixed-voltage panel. At 415 V or 440 V it's rated 242 kA, at 500 V it's 187 kA, and at 690 V it drops to 5.2 kA. That last figure means you need to verify the available fault current if this breaker lands on a 690 V bus; it's still a capable MCCB, but the margin is thinner.
Auxiliaries and releases
That's enough signaling for remote status monitoring and emergency trip control without adding external relays. The basic switch module is order code 3VA2220-7MN32-0AA0, so if you're replacing just the switch mechanism, that's the sub-component to source.
Physical fit
That 105 mm width (about 4.13 inches) means it'll fit a standard 3-pole MCCB slot in most Siemens SENTRON panelboards or on a DIN-rail mount adapter.