The Siemens 3VA4170-6ED34-3AA0 is a 3-pole molded-case circuit breaker in the 3VA4 UL Frame 125 series, rated for line protection with a TM210 thermal-magnetic trip unit. The overload protection is set permanently at Ir=70 A, and the short-circuit pickup is fixed at Ii=10 x In (700 A). That fixed trip setting simplifies BOM consistency: every unit delivers the same protection curve, no field-adjustment errors. The FTFM (Fixed Thermal, Fixed Magnetic) trip unit eliminates the need for calibration or seal-wire management on the line. The 3-pole construction fits standard 3-phase feeder or branch circuits in switchboards and panelboards rated up to 480 V.
Export control is straightforward: AL N / ECCN EAR99, so no special licensing is required for most destinations. RoHS compliance is confirmed since 13-05-19, and REACH Article 33 disclosure notes lead (CAS 7439-92-1) above 0.1% w/w in the current candidate list — a standard declaration for electrical components with lead-bearing alloys.
The 3VA4 UL Frame 125 breaker mounts directly to a panelboard bus or can be installed in a standalone enclosure. The 3-pole form factor with line and load lugs accepts copper or aluminum conductors sized for the 70 A continuous rating. The thermal-magnetic trip unit is non-interchangeable — the TM210 is integral to the frame, so the protection settings are fixed at the factory. No accessory slot for shunt trips or auxiliary contacts is described in the base listing; verify the specific order code suffix if add-on modules are required for remote trip indication or undervoltage release.